Write a review
Evaluations will be activated after verification.
Item successfully added.
Carburator kit -MALOSSI DELLORTO PHBH 30 BD, rotary valve, incl. air intake hose and cables- Vespa PX, Sprint, Rally180 (VSD1T), Rally200 (VSE1T)
Part no.:
1120034
Description
Complete carburetor kit from Malossi for Vespa Sprint, Rally, PX models. Suitable to replace the standard carburetor including carburetor sump. It cannot be combined with the standard oil pump of models with separate lubrication (e.g. PX Lusso). It is therefore absolutely necessary to add oil to each tank (simply use an oil measuring cup with the appropriate scale from our product range). The included suction port automatically covers the hole of the (to be removed) oil pump shaft. This can be easily pulled out of the engine housing.
mixing tube: AV262 needle: X3 (second clip above)) Main nozzle: 138 (6mm nozzle) Side nozzle: 55 (5mm nozzle) choke nozzle: 70 Float needle valve: 225 Incl. Gas and choke pull manifold 90° Carburettor slide: Cutaway 30
inlet port width intake: Ø36mm air filter port width: Ø42mm
AI-translation
The set increases the maximum intake surface by a whopping 125% for the 125-150cc models and by 44% for the 200cc vehicles (starting from the standard carburettor). Furthermore, the intake path is extended. This makes it easier to tune heavily reworked engines with a long intake control angle after the top dead centre of the piston (e.g. racing crankshaft plus extended intake slot in the engine housing). The extended intake stroke effectively dampens blowback, i.e. the blowing out of fuel from the carburettor. The engine runs much more powerful and cleaner, the carburettor can be tuned easily.
optionally such a connection offers additional space for the installation of a vibration chamber (Boost Bottle) to prevent the gas column from flowing back into the carburettor in extreme cases.
To convert the large carburettor into more power, the inlet should be adjusted according to the intake connection. Professionals additionally extend the rectangular inlet window which seals the crankshaft. Every square centimetre of surface is noticeable in the power output.
The Dell'Orto PHBH30 included in the set is delivered with cable choke and the following equipment:
An additional gas slide with a cutaway 50 is included in the kit. This runs leaner in the influence area of the cutaway (up to approx. half throttle) than the installed 30'er slider.
The kit contains an intake hose to the frame which reduces the intake noise considerably. An air filter is not provided. Correspondingly longer cables for throttle and choke actuation are included. Tuning parts for the individual adjustment of the carburettor to the respective engine can be found under "Accessories".
Note: Malossi delivers this set with the PHBH carburettor type BD. Here the adjusting screws are located on the right side, seen in the intake direction.
(US)
AI-translation
€391.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Malossi | M1610701, 1610701 |
| Customers alternatively searched for | |
|---|---|
| 1610701 | M1610701 | Vergaserkit | Vergaserset | Gaser | Zerstäuber | Vergaser | Set | Vergaser | Kit | Carburator | Kit | Carburettor | Carburetor | Carb | Kit Carburateur | Kit Carburatore | Kit Carburador | | |
Related items
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Malossi
1120025
Intake manifold -MALOSSI rotary valve- Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - CS=Ø34mm (carburetors Ø28-30mm - PHBH, VHSH, PWK28, TMX30, Smartcarb 26-28)
1120025
The item is ordered and will be in stock soon
€56.95
*
*incl. VAT plus shipping costs
variants
Dellorto
5350009
Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
5350009
further versions from €5.45
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Dellorto
5350024
Caburator top cap -DELLORTO- PHBH
5350024
The item is ordered and will be in stock soon
€5.99
*
*incl. VAT plus shipping costs
Alternative items
Ersatzteile
Malossi
1120025
Intake manifold -MALOSSI rotary valve- Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - CS=Ø34mm (carburetors Ø28-30mm - PHBH, VHSH, PWK28, TMX30, Smartcarb 26-28)
1120025
The item is ordered and will be in stock soon
€56.95
*
*incl. VAT plus shipping costs
variants
Dellorto
5350009
Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
5350009
further versions from €5.45
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Dellorto
5350024
Caburator top cap -DELLORTO- PHBH
5350024
The item is ordered and will be in stock soon
€5.99
*
*incl. VAT plus shipping costs
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Recently viewed items