Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Crankshaft -MAZZUCCHELLI Racing (rotary valve) 57mm stroke- Vespa PX200

1620004
Crankshaft -MAZZUCCHELLI Racing (rotary valve) 57mm stroke- Vespa PX200
Crankshaft -MAZZUCCHELLI Racing (rotary valve) 57mm stroke- Vespa PX200
Crankshaft -MAZZUCCHELLI Racing (rotary valve) 57mm stroke- Vespa PX200

Description


In order to achieve higher speeds, one should reach for the racing shaft. The extended intake timing results in a much freer engine revs. This measure is especially noticeable with high-revving cylinders.

The quality of the crankshafts is very good and so they resist even the highest revs. Especially for engines with a larger displacement, they are an optimal supplement to extend the usable speed range.

These engines turn out freely, which leads to a significant increase in top speed.
AI-translation

 
€159.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Bearings
sizes: 16x20x20mm
Gudgeon pins
diameter: 16 mm
Crankshafts
stroke: 57 mm
thread rotor side: M12x1,25 right-hand thread
thread drive side: M12x1,5 right-hand thread
diameter crankwebs: 98 mm
width crankwebs: 40.4 mm
diameter bearing seat rotor side: 25 mm
diameter bearing seat drive side: 25 mm
diameter oil seal seat rotor side: 24 mm
diameter oil seal seat drive side: 31 mm
full circle crankshaft:
rotary valve crankshaft:
length rotary crankweb: 194 mm
Vespa PX200 - intake timing for short rotary surface (46mm) (°): 186
Vespa PX200 - intake timing for long rotary surface (62mm fully modified) (°): 205
crankcase has to be milled:
engine casing has to be modified:
Connecting rods
length connecting rod: 110 mm
thickness connecting rod: 5.3 mm
diameter small end connecting rod eye: 20 mm
lubricating hole at small end bearing: no
diameter crankpin: 22 mm
lubricating hole at crankpin bearing: notch
crankpin shims: yes
Customers alternatively searched for
Crankshaft | Crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | Vanne Rotative | Válvula Rotativa | Valvola A Disco Rotante | Rotary Valve |

Ratings


5 Feb 2016

Wie immer Top

21 May 2015

200 Vesper kann ma empfehlen...

19 Apr 2015

alles Prima sieht gut aus

was sie kann wird der Test im Alltags Betrieb zeigen

Recently viewed items