Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)

3331100
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Cylinder -DR177 cc 3 Ports (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)

Description


cylinder machined for PX80

CYLINDER
The cylinder kit offered here is originally intended for use on the PX125 engines. To be able to use it on the engine housings of the PX80, the cylinder base diameter was turned by a professional company.
It fits without further modifications in the engines of the Vespa PX80 models.

ATTENTION: The cylinder base of the 172/177cc cylinders is very thin. By turning it by about 1mm it will be further weakened. To prevent damage due to fatigue fractures, we strongly recommend to modify the engine housing (spin out) instead of using a turned cylinder. A good alternative are the 125/150cc and 166cc cylinders. These offer sufficient wall thickness due to their smaller bore to allow them to be used safely in continuous operation with a machined foot.

Crankshaft
The original crankshaft of the PX80 models has only 48mm stroke.
Therefore it must be replaced with a crankshaft of the PX125/150 models with 57mm stroke.
Professionals can also use a PX125/150 racing crankshaft with 60mm stroke.
The then necessary stroke compensation is done by a head or foot seal with 1.5mm (or depending on the desired control angles in e.g. 0.5mm head and 1.0mm foot seal).


AI-translation

 
This item is currently not available.
€219.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
General
performance class: sport
Gudgeon pins
diameter: 15 mm
Cylinders
type of cooling: air cooled
cylinder head inclusive:
cylinder gasket set inclusive:
diameter exhaust stub: 37 mm
Pistons
production method piston: cast
Cylinder heads
cylinder head type: one piece
OEM numbers (for comparison purposes only)
DR 192KT00017
Please inform me once the product is available again.
Customers alternatively searched for
Zylinder | Ersatzzylinder | Rennsatz | Hubraumkit | Hubraumsatz | Kubiksatz | Sportzylinder | Sportkit | Tuningzylinder | Tuningsatz | Tuningkit | Bigbore | Rennzylinder | Rennkit | Kit | Cylinder | Kolbenlaufbahn | Laufbahn | Kühlrippen | Laufbuchse | Zylinderlaufbuchse | Barrel | Jug | Cylindre | Cilindro |
cylinder machined for PX80 CYLINDER The cylinder kit offered here is originally intended...Continue reading
Recently viewed items