Write a review
Evaluations will be activated after verification.
Item successfully added.
Cylinder head -NAGY BLECHROLLER, CNC Il Naso- Vespa Wideframe Vespa V1 bis V15, V30 bis V33, 125U, ACMA (-1953), Hoffmann A, B, C, M24, Douglas Rod
Part no.:
3331760
Description
Cylinder head "Il Naso"
AI-translation
Fits Vespa engines with a high nose piston (V1-30, Hoffmann, Acma until 1953, 125 U, Douglas Rod). Not suitable for Motovespa models. The compression ratio is about 1:8.
The head can be installed plug n play (depending on the piston crown, the original copper seal must remain in place). It is not necessary to change the spray system - on the contrary. This will worsen the result!
However, the spark plug (short thread) must be replaced. A heat value of 250 (e.g. Bosch W4AC / NGK B7HS) or more is recommended. To be on the safe side the ignition timing should be changed about 4 degrees late.
AI-translation
€209.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Piaggio | 18176 |
| Customers alternatively searched for | |
|---|---|
| Zylinderkopf | Kopf | Head | Zylinderdeckel | Zylinderabdeckung | Cylinder | Cylinder Head | Barrel Head | Combustion Chamber | Culasse | Culata | Testa Cilindro | | |
Recently viewed items