Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Exhaust manifold -RACING/UNRESTRICTED 3-hole- CPI 50cc EURO 2 (2003-) - black

3LL2610B
Exhaust manifold -RACING/UNRESTRICTED 3-hole- CPI 50cc EURO 2 (2003-) - black
Exhaust manifold -RACING/UNRESTRICTED 3-hole- CPI 50cc EURO 2 (2003-) - black
Exhaust manifold -RACING/UNRESTRICTED 3-hole- CPI 50cc EURO 2 (2003-) - black
Exhaust manifold -RACING/UNRESTRICTED 3-hole- CPI 50cc EURO 2 (2003-) - black
Exhaust manifold -RACING/UNRESTRICTED 3-hole- CPI 50cc EURO 2 (2003-) - black

Description


Open sport manifold for full power and top speed.


The throttling of engine power and speed via a manifold is still a popular means for many scooter manufacturers to adapt their 2-stroke engines to the legal requirements of the respective country. For this purpose, the manifold is either tapered in cross-section and/or made longer than necessary. Some designs also have additionally welded-on tubes which additionally cap the power and speed.


Through this open elbow, with a large cross-section and short guide length, both the power and the attainable final speed (= final speed) are increased significantly.


By replacing the elbow, the acceleration increases significantly, the final speed increases to about 60km/h (unless an additional moped throttle is installed). Ideally, the throttle in the variomatic (throttle ring), which is usually present, should also be removed after installing such a manifold. Otherwise the engine will constantly turn too high under full load. If this throttle is also removed, top speeds of over 70 km/h are reached.


If there is still a hose left after the installation of the new elbow, it can be closed without hesitation and fixed with a cable tie. The hose is for the original used secondary air system which only blows fresh air into the exhaust gases to improve the exhaust gas values.


  • An adjustment of the carburetor main jet to size 58 is recommended.

    Fits the following models:


  • CPI-ARAGON
  • CPI-FORMULA R from 2008
  • CPI-FREAKY
  • CPI-HUSSAR (E2) from 2003
  • CPI-OLIVER (E2) from 2003
  • CPI-POPCORN (E2) from 2003
  • Motomojo-Roadster 50 2T
  • MuZ / MZ-Moskito RX 50 2T 2003-
  • MuZ / MZ-Moskito SX 50 2T 2003-
  • Powersports Factory-Viaggio RX8 50 2T
  • Qianjiang-B-05 50 2T
  • Qianjiang-B-08 50 2T
  • TNG-SS49 50 2T
  • Vento-Triton 50 2T
  • Yamati-RX8 50 2T

  • Note: Does not fit CPI 50 Aragon GP models.

    The GP models have an exhaust in the style of a classic two stroke bulb.
    The manifold is therefore much shorter on these exhaust systems and therefore the manifolds are not suitable for the normal systems here.


    (US)
    AI-translation

     
    €34.95 *

    incl. VAT plus shipping costs

    Available immediately (delivery time 1-3 working days*)
    P For this item you get fidelity point/s
    General
    EAN: 8715705042249
    Customers alternatively searched for
    Auspuffkrümmer | Krümmer | Auspuffflansch | Auspuff Krümmer | U | Bend | Downpipe | Exhaust | Manifold | Pipe | Expansion Chamber | Silencer | Muffler | Coude De Pot D'Échappement | Colletore Di Scarico | Codo De Escape |
    Open sport manifold for full power and top speed. The throttling of engine power and speed...Continue reading
    Recently viewed items