This is the new MBD Race-Tour clutch.
It is used with the Lambretta’s standard plates.
Thanks to the clever design, six standard Lambretta plates can be used for this clutch. The spider is CNC machined from billet and extended towards the gearbox. Therefore, pads no longer need bending, in order for them to interlock. Furthermore, the pressure plate was subject to a complete re-design by Mark Broadhurst and has been extended accordingly. In so doing, it has been prevented that the clutch is compressed to a block, ensuring the increased number of plates is actually utilised effectively.
Above all, the individual components of this kit are available and can be combined with the standard Lambretta clutch.
- MBD sprocket
- MBD pressure plate for an increased travel distance of the clutch
- MBD clutch spider, extended towards gearbox
- Clutch nut
- Clutch tab washer
- MBD clutch springs
- Both clutch needle bearings
Conclusion: A great piece of equipment! Perfect re-design of the original components. Can be combined with existing parts and mounted with standard tools. Can be used with either 5 x Surflex B clutch plates with 4 x 1.5mm clutch steels or 6 x Green/Red plates with 5 x 1.2mm clutch steels. Or can be used with thicker bottom friction and steel plates