Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

7671201
Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)
Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)
Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

Description


Very high quality BGM PRO special clutch nut for all Vespa Largeframe
Replaces the castle nut (used by Piaggio up to approx. 1990)

ADVANTAGES

  • Replaces the original clutch castle nut
  • Significantly higher tightening torque possible: >70Nm (not more than 100Nm)
  • Safe handling
  • No more special tools (crown nut wrench) required
  • Standard hexagon (width across flats 15)
  • Suitable for all Largeframe with old 6/7 spring clutch type

FITS
The nut is suitable for all vehicles built from 1950 onwards, e.g. V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc...

  • Suitable for all Largeframe with old 6/7 spring clutch type

This nut completely replaces the old-fashioned castle nut and thus enables safe and precise work even with a torque wrench. In addition to the precise production, it is also suitable for a tightening torque of over 70Nm due to the use of steel with a hardness of 10 (in our internal tests we were able to load the nut with a tightening torque of 170Nm).
Conventional castellated nuts often give up at 40Nm. With the BGM nut, slipping and damage to the crankshaft/clutch hub due to a loose clutch nut is a thing of the past.

TECHNICAL DATA

  • Hardness: 10
  • Thread: M12x1.50 (with collar)
  • Diameter at collar: 18.6mm
  • Height: 9mm
  • Width across flats: 15
  • Incl. matching serrated lock washer

NOTE
The nut must not be fitted with an impact wrench.
The nut has enormous toughness and tensile strength. However, due to its special design, which is due to the limited space available, it is not suitable for the extremely high load peaks of modern cordless impact wrenches. These not only easily reach twice the guaranteed tightening torque of the nut, but also generate load peaks that can no longer be absorbed by the elasticity of the nut. If the nut is tightened as prescribed using a conventional (manual) torque wrench, it is a very reliable and durable solution. Its large safety reserves far exceed those of the original nut.

Conclusion: No more slipping when loosening/tightening the nut and a bombproof clutch.

AI-translation

 
€8.04 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
General
EAN: 4251389102823
Customers alternatively searched for
Kupplungsmutter | Ersatz | Kronenmutter | M12 | Hochfest | Kupplungsmutter | Kupplungsbefestigung | KupplungssicherungsMutter | Wandlermutter | Kupplungsicherungsmutter | Befestigungsmutter | Kulumutter | Clutch | Nut | Castle | Castlenut | Crown | Crownnut | Ecrou D'Embrayage | Dado Fissa Frizione | Tuerca Embrague |
Very high quality BGM PRO special clutch nut for all Vespa Largeframe Replaces the castle nut...Continue reading

Fits the following vehicles


Ratings


18 Oct 2016

Excellent

15 Oct 2016

great service !!!

14 Oct 2016

It could be cheaper.

17 Apr 2016

ras

5 Feb 2016

Wie immer Top

25 Aug 2015

gute Alternative zur Kronenmutter, Fächerscheibe dazu ist aber unnötig, Nord-Lock ist empfehlenswerter!!

17 May 2015

Qualität ok, passte bei mir leider nicht, da die Mutter zu gross war, M10 wäre richtig

11 May 2015

passt und erfüllt den zweck, macht spez.-werkzeug für die kupplungsmutter überflüssig und spart zeit beim ein- und ausbau

18 Feb 2015

damit bleibt die Kupplung wo sie hingehört

12 Jan 2015

Fits!

5 Nov 2014

Gute Idee!!

Ersatzteile


Curved washer (Schnorr) -DIN 6796 steel, plated- M12
OEM-Qualität
7671201SC12
OEM-Qualität
Curved washer (Schnorr) -DIN 6796 steel, plated- M12
Available immediately (delivery time 1-3 working days*)
€2.59 *
*incl. VAT plus shipping costs
Serrated lock washer M12 for flywheel nut -OEM QUALITY- Vespa PX, T5 125cc, Cosa, PK XL, PK125 ETS
OEM-Qualität
9000009
OEM-Qualität
Serrated lock washer M12 for flywheel nut -OEM QUALITY- Vespa PX, T5 125cc, Cosa, PK XL, PK125 ETS
Available immediately (delivery time 1-3 working days*)
€0.69 *
*incl. VAT plus shipping costs
Recently viewed items