Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Crankshaft -TAMENI Vespa 125 VM1T (1953-1954), Hoffmann HA/HB- direct intake, bell-shaped crankshaft, stroke 50mm, conrod 110mm, conrod pin=Ø=21mm, gudgeon pin=Ø=15mm (conrod small end bushing)

7672918
Crankshaft -TAMENI Vespa 125 VM1T (1953-1954), Hoffmann HA/HB- direct intake, bell-shaped crankshaft, stroke 50mm, conrod 110mm, conrod pin=Ø=21mm, gudgeon pin=Ø=15mm (conrod small end bushing)
Crankshaft -TAMENI Vespa 125 VM1T (1953-1954), Hoffmann HA/HB- direct intake, bell-shaped crankshaft, stroke 50mm, conrod 110mm, conrod pin=Ø=21mm, gudgeon pin=Ø=15mm (conrod small end bushing)
Crankshaft -TAMENI Vespa 125 VM1T (1953-1954), Hoffmann HA/HB- direct intake, bell-shaped crankshaft, stroke 50mm, conrod 110mm, conrod pin=Ø=21mm, gudgeon pin=Ø=15mm (conrod small end bushing)
Crankshaft -TAMENI Vespa 125 VM1T (1953-1954), Hoffmann HA/HB- direct intake, bell-shaped crankshaft, stroke 50mm, conrod 110mm, conrod pin=Ø=21mm, gudgeon pin=Ø=15mm (conrod small end bushing)
Crankshaft -TAMENI Vespa 125 VM1T (1953-1954), Hoffmann HA/HB- direct intake, bell-shaped crankshaft, stroke 50mm, conrod 110mm, conrod pin=Ø=21mm, gudgeon pin=Ø=15mm (conrod small end bushing)

Description


Spare crankshaft for your Vespa. Knocked out half-moon seats, broken crank webs, run-in connecting rod bearings - there are many damages that make a crankshaft ready for scrap. If a repair of the original shaft is no longer worthwhile, we can offer you with this original repro a valuable alternative, with which your oldtimer comes back on the road.


AI-translation

 
This item is currently not available.
€141.90 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
Bearings
sizes: 15mm
Gudgeon pins
diameter: 15 mm
Crankshafts
stroke: 54 mm
diameter bearing seat rotor side: 25 mm
diameter bearing seat drive side: 25 mm
diameter oil seal seat rotor side: 20 mm
diameter oil seal seat drive side: 20 mm
full circle crankshaft:
rotary valve crankshaft:
crankcase has to be milled:
engine casing has to be modified:
Connecting rods
length connecting rod: 110 mm
diameter small end connecting rod eye: 15 mm
OEM numbers (for comparison purposes only)
Piaggio 018600
Please inform me once the product is available again.
Customers alternatively searched for
Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore
Spare crankshaft for your Vespa . Knocked out half-moon seats, broken crank webs, run-in...Continue reading

Ratings


14 Nov 2014

Limaseitig ist das Gewinde M10 x 1.5 gut oder schlecht? meine Muttern Passen alle nicht!

Recently viewed items