Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm

7675160V2
Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm
Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm
Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm
Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm
Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm

Description



Carburettor kit -MALOSSI 30mm Dellorto PHBH BD, diaphragm X360


New V2.0 version of the X360 diaphragm intake manifold with 30mm Dellorto carburettor PHBH BD from Malossi. Fits all engine case variants of the large frame engines such as the Vespa Sprint, Rally, PX, Cosa.

Now with reduced clearance for engine cases with small sealing surface (T5 and PX80-150 with less than 60 millimeters sealing surface, measured between the holes for the carburetor mounting screws).

The newly added sealing surface inside the socket forms a strong flow edge, on housings with long sealing surface we recommend to mill the socket inside. Alternatively we recommend the intake manifold EVO1 from MMW.

As with all conversions to a diaphragm controlled intake, the original rotary valve control via crank web is omitted. Therefore, the engine case can and should be milled out (for optimal performance increase). Optionally, a crankshaft for diaphragm intake is recommended for a further increase in engine power.

  • Intake rubber stepless 360° adjustable

  • Good insulation of the carburettor against engine heat

  • Small installation height

  • Rubberized, self-sealing diaphragm body with 0,3mm carbon plates

  • Cover of the oil pump hole

  • Fits on engine cases with short or long sealing surface

Attention: For mounting it is necessary to screw two brass threaded bushings (enclosed) into the holes of the carburetor mounting screws of the engine case. The connecting piece itself is fixed to the engine case with two M5 hexagon socket screws.

Scope of delivery

  • Intake manifold incl. diaphragm

  • Throttle and choke cable

  • Gasket, clamp, screws for fastening

  • Spare connecting rubber

  • Carburettor 30mm Dellorto PHBH BD

(TW021221]



AI-translation

 
€359.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Malossi M1615895, 1615895
Customers alternatively searched for
1615895 | M1615895 | Vergaserkit | Vergaserset | Gaser | Zerstäuber | Vergaser | Set | Vergaser | Kit | Carburator | Kit | Carburettor | Carburetor | Carb | Kit Carburateur | Kit Carburatore | Kit Carburador |
Carburettor kit -MALOSSI 30mm Dellorto PHBH BD, diaphragm X360 New V2.0 version of...Continue reading

Fits the following vehicles


Recently viewed items