Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Roller bearing -NU2205 ECP- (25x52x18mm) - (used for crankshaft flywheel side Lambretta GP, DL)

8002111
Roller bearing -NU2205 ECP- (25x52x18mm) - (used for crankshaft flywheel side Lambretta GP, DL)
Roller bearing -NU2205 ECP- (25x52x18mm) - (used for crankshaft flywheel side Lambretta GP, DL)

Description


Sits in the maghousing and can also be installed on the Li/SX shaft, if you simply leave out the spacer ring (under the large shaft seal)!
For installation, it is best to place the cold bearing (overnight in the freezer) in the housing, which has been carefully warmed with a blowtorch. Depending on the fit, first look for a suitable driver that is supported on the outer ring.
If the bearing is seated, insert the lightly oiled shaft sealing rings.
The grease packing for the bearing should consist of appropriate high-pressure grease. Pack enough grease in so that the rollers are just visible, but at the same time leave space for the grease to expand.
Too much or the wrong grease can be pressed out of the shaft seals when the motor is hot.


AI-translation

 
€47.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
General
EAN: 7316577028358
Bearings
type: NU 2205
type extension: ECP
inner diameter: 25 mm
outer diameter: 52 mm
width: 18 mm
sizes: 25x52x18mm
OEM numbers (for comparison purposes only)
Innocenti 19012034
Customers alternatively searched for
Rollenlager | Kugellager | Lager | Limalager | Limalagerung | Lichtmaschinenlager | Roller | Bearing | Roulement À Rouleaux | Cuscinetto A Rulli | Cojinete De Rodillos |
Recently viewed items