Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -TAMENI RACING 60mm stroke, 107mm conrod- Lambretta DL/GP
Part no.:
8070006
Description
This is the entry into the world of Lambretta racing shafts.
The shaft is based on very good, Italian crank webs and an equally good connecting rod.
The shaft is assembled with European quality bearings and so this shaft can become a faithful companion even in high revving engines. Due to the further outward moved con rod pin this shaft has 60 mm stroke, which brings a nice increase in displacement and the possibility to experiment with the timing.
AI-translation
The shaft is based on very good, Italian crank webs and an equally good connecting rod.
The shaft is assembled with European quality bearings and so this shaft can become a faithful companion even in high revving engines. Due to the further outward moved con rod pin this shaft has 60 mm stroke, which brings a nice increase in displacement and the possibility to experiment with the timing.
AI-translation
€240.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 16x20x20mm |
| Gudgeon pins | |
| diameter: | 16 mm |
| Crankshafts | |
| stroke: | 60 mm |
| thread rotor side: | M12x1,0 left-hand thread |
| thread drive side: | M8x1,0 right-hand thread |
| diameter crankwebs: | 95.9 mm |
| width crankwebs: | 40.5 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 33 mm |
| diameter oil seal seat drive side: | 33 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| diameter variator pivot: | 17.9 mm |
| variator pivot type: | toothed |
| Connecting rods | |
| length connecting rod: | 107 mm |
| thickness connecting rod: | 5.5 mm |
| diameter small end connecting rod eye: | 20 mm |
| lubricating hole at small end bearing: | yes |
| diameter crankpin: | 22 mm |
| lubricating hole at crankpin bearing: | slot |
| crankpin shims: | yes |
| OEM numbers (for comparison purposes only) | |
| Innocenti | 22212150, 22012190 |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | |
Related items
Recently viewed items