Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Clutch -VESPA type 7 springs (Ø=115mm)- for genuine primary gear (helical teeth) 65 tooth - 23 tooth - 3 friction plates

9020054
Clutch -VESPA type 7 springs (Ø=115mm)- for genuine primary gear (helical teeth) 65 tooth - 23 tooth - 3 friction plates
Clutch -VESPA type 7 springs (Ø=115mm)- for genuine primary gear (helical teeth) 65 tooth - 23 tooth - 3 friction plates
Clutch -VESPA type 7 springs (Ø=115mm)- for genuine primary gear (helical teeth) 65 tooth - 23 tooth - 3 friction plates

Description


NOTE: The manufacturer sometimes uses too thin lining discs in this clutch. This causes the basket to move too far towards the clutch cover, which results in a permanently separating clutch. Please order a separate clutch facing set for safety reasons. Unfortunately the clutch manufacturer cannot be contacted about this problem.


Original clutch type of the Vespa Rally 200, PX200, COSA200: Ø115mm - 7 springs, 23 teeth.

This large clutch type with 115mm diameter and 7 springs marks the middle field of the clutch types available for the large frame engines. It is already stable enough to function well even in powerful everyday engines.



With 23 teeth, this is the longest (original available) pinion in terms of gear ratio, which is used in combination with the original 65 tooth primary gear alone.


This clutch is recommended as a replacement for the 200cc engines (except Vespa COSA 200 with aluminium cylinder). If the primary wheel is exchanged (engine must be opened completely), this clutch is also an ideal companion for the DR135 on PX80 with standard exhaust or large tuning cylinders from 172cc on PX125/PX150.



Who wants to bring a lot of torque and power on the road with confidence, can't miss the BGM Superstrong. A hub construction milled from the solid enables perfect operation and a precisely defined pressure point even under high loads. Already on the road in many extremely powerful engines.


Without modifications, the clutch can be installed in the following models:


  • Rally200 23/65 (original)
  • PX200 23/65 (original)
  • COSA 200 23/65 (original)

  • Note: Should this type of coupling be used in older vehicles such as VBB, VNB, GT, GTR oretc., in addition to the changes already described to the primary wheel, motor housing and clutch cover, the clutch spacer disc must also be replaced with that of the newer models (3.3mm instead of 1.5mm, see accessories).


    (US)


    We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant.


    AI-translation

     
    €114.00 *

    incl. VAT plus shipping costs

    Available immediately (delivery time 1-3 working days*)
    P For this item you get fidelity point/s
    Gear box (classic scooters)
    number of teeth small primay sprocket: 23
    combinable primary sprockets: 64 teeth helical (BGM PRO), 64 teeth helical (Bollag Motos, Stoffi's), 65 teeth helical (BGM PRO, Piaggio), 65 teeth helical (Bollag Motos, Stoffi's)
    Clutch (Largeframe, Wideframe)
    teeth clutch sprocket: 23
    height of clutch sprocket: 9.5 mm
    number of springs: 7
    number of friction discs: 3
    friction material: grey cork
    thickness friction discs: 3.2 mm
    number of steel discs: 2
    inner diameter: 108 mm
    inner diameter clutch spider: 109.5 mm
    outer diameter clutch spider: 115 mm
    manufacturing method clutch spider: deep-drawn
    clutch spider reinforced:
    OEM numbers (for comparison purposes only)
    Piaggio 1130706, 245830, 131223, 2458305
    Customers alternatively searched for
    Kupplung | Kulu | Koppeling | Clutch | Schleuderbacken | Schleuderbackensatz | Kraftübertragung | Kupplungsrupfen | Kupplungsrutschen | Anfahren | Ruckeln | Anfahrruckeln | Durchgehen | Embrayage | Frizione | Embrague |

    Available versions

    Part no.: Type Price Stock Cart Save
    Part no.: 9020054 Type 3 plates Price
    €114.00
    Stock
    Available immediately (delivery time 1-3 working days*)
    Cart Save
    Part no.: 9020081 Type 4 plates Price
    €114.00
    Stock
    The item is ordered and will be in stock soon
    Cart
    Save
    NOTE: The manufacturer sometimes uses too thin lining discs in this clutch. This causes the...Continue reading

    Fits the following vehicles


    Ersatzteile


    Clutch washer -OEM QUALITY- Vespa type PX - brass
    OEM-Qualität
    9020042
    OEM-Qualität
    Clutch washer -OEM QUALITY- Vespa type PX - brass
    Available immediately (delivery time 1-3 working days*)
    €2.19 *
    *incl. VAT plus shipping costs
    Clutch base plate -OEM QUALITY- Vespa type 7 springs-
    OEM-Qualität
    9020045
    OEM-Qualität
    Clutch base plate -OEM QUALITY- Vespa type 7 springs-
    Available immediately (delivery time 1-3 working days*)
    €51.96 *
    *incl. VAT plus shipping costs
    Clutch friction plate set -BGM ORIGINAL Vespa type 7 springs (Rally200, PX200, T5 125cc)- 3 plates
    bgm Original
    BGM8073
    bgm Original
    Clutch friction plate set -BGM ORIGINAL Vespa type 7 springs (Rally200, PX200, T5 125cc)- 3 plates
    Available immediately (delivery time 1-3 working days*)
    €14.74 *
    *incl. VAT plus shipping costs
    Clutch steel plate -BGM PRO, Vespa type 7 springs- Vespa PX 200, Cosa 1, T5 125cc, Rally 180, Rally 200, GS 160 - 1.5mm
    bgm Pro
    BGM8073S
    bgm Pro
    Clutch steel plate -BGM PRO, Vespa type 7 springs- Vespa PX 200, Cosa 1, T5 125cc, Rally 180, Rally 200, GS 160 - 1.5mm
    further versions from €3.28
    • Available immediately (delivery time 1-3 working days*)
      1.5mm
    Available immediately (delivery time 1-3 working days*)
    €3.28 *
    *incl. VAT plus shipping costs
    Recently viewed items