Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Crankshaft -TOP RACING Evolution- Minarelli 50cc vertical (for 10mm gudgeon pin) -TOP RACING Evolution-1994), STUNT, ZUMA50, AMICO

BGM034002
Crankshaft -TOP RACING Evolution- Minarelli 50cc vertical (for 10mm gudgeon pin) -TOP RACING Evolution-1994), STUNT, ZUMA50, AMICO
Crankshaft -TOP RACING Evolution- Minarelli 50cc vertical (for 10mm gudgeon pin) -TOP RACING Evolution-1994), STUNT, ZUMA50, AMICO
Crankshaft -TOP RACING Evolution- Minarelli 50cc vertical (for 10mm gudgeon pin) -TOP RACING Evolution-1994), STUNT, ZUMA50, AMICO
Crankshaft -TOP RACING Evolution- Minarelli 50cc vertical (for 10mm gudgeon pin) -TOP RACING Evolution-1994), STUNT, ZUMA50, AMICO

Description


The TOP RACING EVOLUTION crankshafts are racing shafts of the highest quality.

The completely forged shafts are finely balanced full metal shafts. Both the crank webs and the connecting rod are forged. This gives the shaft an unbelievable resistance.

In order to achieve the highest possible weight, enormously important for a low-vibration engine run, the shafts were not provided with plastic paddings. Instead, the crank webs were designed directly as solid web shafts. It may not look as colourful, but it has only advantages.

The solid cheek shaft, by increasing the precompression, results in a better filling level of the cylinder over the entire speed range.

The bearing is in no way inferior to this top quality. Thus the SSC racing bearings resist even the most extreme speed orgies. The double slotted conrod with silver cage, as well as double lubrication holes in the upper conrod bearing, is able to withstand even the most brutal continuous loads.

The holes to achieve optimal balancing are balanced with copper and aluminum weights.

Thanks to its very high weight and the selection of the balancing weights, it achieves a first class running culture.
AI-translation

 
€149.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Bearings
sizes: 10x14x13mm
Gudgeon pins
diameter: 10 mm
Crankshafts
stroke: 40.2 mm
thread rotor side: M10x1,25 right-hand thread
thread drive side: M10x1,25 right-hand thread
diameter crankwebs: 68.8 mm
width crankwebs: 36.8 mm
diameter bearing seat rotor side: 20 mm
diameter bearing seat drive side: 20 mm
diameter oil seal seat rotor side: 20 mm
diameter oil seal seat drive side: 20 mm
full circle crankshaft:
filling material for full circle: steel
material balancing weights: aluminium
rotary valve crankshaft:
crankcase has to be milled:
engine casing has to be modified:
diameter variator pivot: 12.8 mm
variator pivot type: toothed
can be used with genuine variator: yes
Connecting rods
length connecting rod: 80 mm
thickness connecting rod: 3.8 mm
diameter small end connecting rod eye: 14 mm
lubricating hole at small end bearing: yes
diameter crankpin: 16 mm
lubricating hole at crankpin bearing: slot
crankpin shims: yes
Customers alternatively searched for
Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | Jasil
The TOP RACING EVOLUTION crankshafts are racing shafts of the highest quality. The completely...Continue reading

Fits the following vehicles


Ersatzteile


Small end needle bearing -OEM QUALITY (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
OEM-Qualität
3710017
OEM-Qualität
Small end needle bearing -OEM QUALITY (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
Available immediately (delivery time 1-3 working days*)
€7.49 *
*incl. VAT plus shipping costs
Small end needle bearing -ITALKIT (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH) - silver cage
Italkit
7671690
Italkit
Small end needle bearing -ITALKIT (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH) - silver cage
Available immediately (delivery time 1-3 working days*)
€11.65 *
*incl. VAT plus shipping costs
Small end needle bearing -BGM ORIGINAL (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
bgm Original
BGM0330
bgm Original
Small end needle bearing -BGM ORIGINAL (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
Available immediately (delivery time 1-3 working days*)
€7.98 *
*incl. VAT plus shipping costs
Recently viewed items