0 ARTICLE0.00 €

CHECKOUT 0 article0.00 €


/ Crankshaft / Crankshaft


< back

Crankshaft -BGM Pro HPC 60mm stroke, 110mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc

partnumber BGM11065G

Delivery time: 1-2 days, Express 1 day*
Forged high primary compression crankshaft with Yamaha con rod.
The balancing was highly focused while the development took place. Thanks to the balancing weights combining Tungsten (100 gr. each side), copper weights and hidden pockets the crankshaft gives a very smooth engine run.
The Yamaha con rod with 110 mm length gives an easier life to the big end bearing. The delivery of every crankshaft contains a 3 mm base spacer to equal the longer rod. The lubrication of the big end is by two sufficient slots. The open cage silver bearing leaves nothing to be desired.
The diameter of the gudgeon pin is 22 mm. The combination with the right undersize to the crank webs and a special adhesive as a fluid is perfectly suited against twisting.
Upshot: All in all the bgm crankshaft gives the highest possible quality to every single component. Production accuracy, forging technology as well as the highly elaborated balancing leaves nothing to be desired.
  • The delivery does contain:
  • Crankshaft 60 mm stroke / 110 mm Yamaha con rod
  • Base gasket small casings - 3 mm
  • Base gasket large casings- 3 mm
  • Small end bearing - 20 mm width
  • Small end bearing- 22 mm width
  • Spacer for bearing 6305 - 0.5 mm
  • Spacer for bearing 6305 - 1.0 mm
  • Maghousing gaskets in three different thicknesses
  • Comprehensive fitting instructions
  • Vielen Dank für Deine Bewertung!

    To evaluate products you need to be logged in.

    Not registered in our online shop yet? Just click below and register. Features like wish lists are waiting for you!

    Please register

    Wislist sent

    Alternative products


    Frequently Bought Together