Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Ignition -BGM ORIGINAL stator (point set ignition, 5 cables, 6V)- Vespa Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T) - for vehicles without indicators, without battery

BGM8023
Ignition -BGM ORIGINAL stator (point set ignition, 5 cables, 6V)- Vespa Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T) - for vehicles without indicators, without battery
Ignition -BGM ORIGINAL stator (point set ignition, 5 cables, 6V)- Vespa Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T) - for vehicles without indicators, without battery
Ignition -BGM ORIGINAL stator (point set ignition, 5 cables, 6V)- Vespa Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T) - for vehicles without indicators, without battery
Ignition -BGM ORIGINAL stator (point set ignition, 5 cables, 6V)- Vespa Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T) - for vehicles without indicators, without battery
Ignition -BGM ORIGINAL stator (point set ignition, 5 cables, 6V)- Vespa Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T) - for vehicles without indicators, without battery

Description


Ignition / alternator 6V, 3 coils, 5 cables, AC (cars without battery)
Fits all Vespa from approx. 1960-1980 onwards, e.g. GL150 (VLA1T), Sprint150 (VLB1T), Sprint 150 Veloce (VLB1T)

A complete spare ignition base plate with all coils, contacts and capacitor is supplied. The connecting cables have the original colours, so the exchange is easy.

  • On-board voltage: 6V AC
  • cable: 5 (black, blue, red, green, yellow)
  • coils: 3
  • contact type: long
  • capacitor: 20mm, two cables, screwed
  • For vehicles WITHOUT battery

NOTE
Please adjust the coils to the existing pole wheel before installation. To do this, loosen the screws of the coils and adjust and retighten them accordingly. The clearance between the pole wheel and coils should be approx. 2/10mm.
The pole wheel should therefore have an internal diameter of 106.4mm. In Piaggio workshops they used a special tool (13768/C, no longer available) to center the coils on the ignition base plate. If the clearance of 2/10mm cannot be achieved by the offset of the coils, the ignition base plate together with the mounted coils can be turned to 106mm on a lathe.


AI-translation

 
€79.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Ignition stator plate
ignition type: points
tension: 6V
current: alternating current (AC)
type of rotor for stator: external rotor
position (pickup / points): internal
number of coils: 3
diameter stator: 115 mm
diameter coils: 106 mm
total height: 36 mm
number of wires: 5
type of plug connector: single plug connector
Rotor
rotor type: external rotor
Ignition
ignition timing: fixed
rotor incl.:
CDI incl.:
voltage regulator:
Customers alternatively searched for
Zündung | Lichtmaschine | Lima | Lichtmaschiene | Grundplatte | Zündgrundplatte | Zündungsgrundplatte | Ankerplatte | Zündanker | Zündankerplatte | Zündplatte | Ruckeln | Zündaussetzer | Zündungsprobleme | Zündungsaussetzer | Zündfunke | Funke | Schwacher | Ignition | Ignite | Bad | Spark | Detonation | Allumage | Statore Accensione Completo | Encendido | Estator | Stator |

Ratings


6 Jul 2019
Naja.

Sieht Qualitativ hochwerig aus. Leider streifen die Spulen im Polrad und müssen ordentlich nachgearbeitet werden. Natürlich habe ich berücksichtigt, dass man die Spulen einstellen muss-es geht sich jedoch trotzdem nicht aus(2 Polräder probiert gleiches Problem).
Die Kabel sind viel zu lange und müssen gekürzt werden. Schade um die schönen Anschlüsse! Besser wäre, die stecker einfach beizulegen und man kann sich das Kabel selbst ablängen.
Funtioniert sonst tadellos, leider halt wie so oft einne Bastlerei.

Recently viewed items