Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)

BGM8571
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)
Carburettor -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (type without autolube)

Description


BGM FASTER FLOW SI carburetor - optimized series carburetors for higher performance engines

Performance-enhanced engines require a permanent and reliable supply of petrol.
The BGM PRO Faster Flow carburettors are optimised to meet these requirements and are based on a brand new SI24/24 E or SI26/26 E Dell'Orto/Spaco carburettor. They are completely disassembled, tested, reworked, cleaned and reassembled with great care at our factory, which means that they meet the high demands of a heavily modified engine.

MODIFICATIONS

  • an enlarged connecting bore from float chamber to nozzle block

  • an additional hole in the area of the float needle

  • spring-loaded float needle

These modifications result in a significantly improved fuel supply, which means that there is no shortage of fuel even with very powerful exhaust systems. Especially when using an air funnel, this measure is extremely important to keep the mixture composition stable over the entire speed range. The spring-loaded float needle has a much longer life span and can compensate vibrations very well. The improved fuel supply is of course also an advantage on complete series engines.

ADVANTAGES

  • no more empty-sucked nozzle block when using a strong exhaust
  • still well tunable even with power above 20HP
  • unobtrusive and powerful
  • quiet and suitable for everyday use (separate lubrication!)

AVAILABLE IN

  • Ø24mm cross-section

  • Ø26mm cross section

  • for mixed lubrication 1:50 (oil is added manually during refuelling)

  • for separate lubrication (vehicles standard with oil pump, from 1984)

FIT FOR
The carburettor is suitable for all engines with SI20/20D or 24/24E carburettors.
These are all Vespa PX80 (V8X), PX125 (VNX), PX150(VLX) and PX200(VSX) models.
Please check if the car already has an oil pump (all from 1984 onwards, please choose the carburettor with separate lubrication).

They are also suitable for all older engines that have a rotary slide valve control (crankshaft controls the intake).
These are for example Vespa VNB, VBA, VBB, Super (VBC/VNC), GL (VLA/VGL), GT/GTR (VNL), Sprint (VBL), Rally(VSD/VSE).
It can therefore also be used on the models with originally only 80-150ccm which only have a Ø20mm carburettor ex works.

TIP: Carburettors for engines with separate lubrication can also be used on engines without oil pump if the pull rod for the gas slide is replaced.
They only have a hole for the externally supplied oil. On engines without separate lubrication this hole is closed by the carburettor sump.

CHANGES
Older vehicles (e.g. VBB, VNB, VLA/VGL, VLB) still have small air filters, here you should change to the filter of the PX models. The carburettor sump of the models with original Ø20mm carburettor should be adapted to the larger carburettor in the transition area to the engine. Thus the full cross-section of the carburettor is used.


TUNING
The built-in spraying corresponds to the standard spraying of the PX200 models.

This is for many tunings on 177ccm basis already very well suitable, only the main jet should be adapted.
Engines with 200ccm and more need partly also somewhat larger side jets (e.g. 58/160).
The tuning takes place in principle from too large (too fat) to lean.
The initial nozzle sizes should therefore be selected so that the engine stutters (overgreased). This gives you a safe starting point for tuning.
This is best done with our nozzle sets.



NOT
E
Modified (drilled) air filters or air intake funnels always require richer nozzles due to the better working air correction. The intake funnels (also called venturi) may need a main air correction nozzle that is smaller and therefore has a greasing effect (e.g. 140 instead of 160).
Tips for the operation of the individual carburettor components can be found in the individual parts (side nozzle, air nozzle, slide).
All new SI carburettors are manufactured under licence by the company Spaco in India. These carburettors have been and are used in the series production of Piaggio for a long time. They are of the same quality as the original Dell'Orto carburettors. They also pass the quality assurance at Dell'Orto and are therefore partly packed in Dell'Orto boxes.

SUMMARY
Very inconspicuous tuning carburettor that already has all the useful modifications on board and also supplies engines with well over 20 hp safely and permanently with petrol!

(US 21820)



AI-translation

 
This item is currently not available.
€147.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
General
EAN: 4250366615714
Carburettors
size venturi: 24 mm
size main jet: 118
main jet type: Dellorto SI (4576)
size pilot jet: 55/160
idle jet type: Dellorto SI (9892)
size air jet: 160
air jet type: Dellorto SI (5827)
size choke jet: 60
choke jet type: Dellorto SI (5582)
size atomiser: BE3
power jet:
size slide: 8492.04
slide type: flat slide
choke type: manual, cable
mounting type air filter: with screws
connection size air filter: 33 mm
mounting type intake manifold: flange connection
connection size intake manifold: 60 mm
idle gas screw: on top
fuel/air mixture screw position: left hand side
fuel hose position: right hand side
connection size fuel hose: 8 mm
height: 125 mm
width: 71 mm
depth: 80 mm
material float chamber: metal
connector for oil hose:
vacuum connection:
Please inform me once the product is available again.
Customers alternatively searched for
Vergaser | Vergaßer | Gaser | Zerstäuber | Carburator | Carburettor | Carburetor | Carb | Carburateur | Carburatore | Carburador |
BGM FASTER FLOW SI carburetor - optimized series carburetors for higher performance engines...Continue reading

Fits the following vehicles


Ratings


11 Jun 2020
Alles im fast flow

Der Vergaser gast ordentlich und macht 'nen soliden Eindruck. Der Umbau war easy-peasy.
Allerdings fehlte mir der richtige O-Ring für die Gemischeinstellschraube, weil mein voriger Vergaser die kurze Variante mit dem Blindstopfen für die Vergaserwanne drauf hatte.
Also: den direkt mitbestellen und am besten auch auf den Artikel im Shop verlinken, lieber Admin.
Ansonsten wie gesagt topp!

6 Jun 2020
You've got the power!

Alten Vergaser raus, neuen Vergaser rein und losgasen!
Wichtiger Hinweis: die Gemischtschraube ist die lange Variante, die aus der Vergaserwanne rausragt. Also direkt den passenden Gummiring mit bestellen, wenn bisher der Stopfen vorhanden ist!

14 May 2019

Funktioniert perfekt an meinem leicht modifizierten 125er Motor,gut einstellbar,alles absolut dicht.

16 Feb 2018

Da kann der Vergaser nichts dazu, dass ich nur vier Punkte vergebe. Bei mir funktioniert nie ein Vergaser, dieser dafür aber ausgesprochen gut.

23 Jan 2018

de momento va muy bien el carburador, espero hacerle muchos kilometros jejejeje

5 Jan 2016

part of a tuning project not yet fitted

16 Feb 2015

Wie beschrieben sehr gute Qualität!

Ersatzteile


Throttle slide -SCOOTER CENTER- for Dellorto / Spaco SI24/24 E/H Vespa PX200, Cosa200 - (Typ 8492-4) - Cutaway 100% (mager)
variants Scooter Center
3331590
Scooter Center
Throttle slide -SCOOTER CENTER- for Dellorto / Spaco SI24/24 E/H Vespa PX200, Cosa200 - (Typ 8492-4) - Cutaway 100% (mager)
further versions from €24.89
  • The item is ordered and will be in stock soon
    4.0
  • Available immediately (delivery time 1-3 working days*)
    4.1
  • Available immediately (delivery time 1-3 working days*)
    4.2
Carburettor gasket set -DELLORTO- SI 18-20-24 Vespa PX80, PX125, PX150, PX200, Sprint, Rally
Dellorto
5350007
Dellorto
Carburettor gasket set -DELLORTO- SI 18-20-24 Vespa PX80, PX125, PX150, PX200, Sprint, Rally
Available immediately (delivery time 1-3 working days*)
€8.98 *
*incl. VAT plus shipping costs
Recently viewed items