Write a review
Evaluations will be activated after verification.
Item successfully added.
Carburator kit -MALOSSI 3-stud, 25mm Dellorto PHBL, rotary valve- Vespa PK XL
Part no.:
M1610680
Description
The rotary vane intake manifolds for the small frame engines offer the possibility to use carburettors up to 24mm. This allows to realize quite powerful engines, which can easily reach the 120kmh mark. To enable the full performance potential of the engine, the engine housing should always be adapted to the cross-section of the carburetor (as far as possible). Whether a larger carburettor and thus a larger intake manifold is necessary at all, depends on the displacement and the speed at which the full power should be delivered. A 133ccm cylinder (e.g. Polini) with a nominal speed of 7000 rpm is very well served with a carburettor cross section of 24mm. Using larger carburetor diameters on such an engine does not increase the power output and, apart from the engine's efficiency, it also usually reduces the tunability. It only makes sense to use larger carburettors if the engine delivers its full power only at a higher rpm (not to be confused with the maximum rpm the engine can reach in third gear!) As an example, the 136cc Malossi is the only one to be mentioned here. This one is already being driven with the direct intake kit with a cross-section of 25mm. With a suitable exhaust and other remaining design of the engine, this cylinder can also make good use of carburettors up to 30mm. Intake manifolds for such extreme tuning variants are offered by us in long version by Zirri. With these intake manifolds the carburettor is still in its original position.
AI-translation
AI-translation
€274.50 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Malossi | 1610680, M1610680 |
| Customers alternatively searched for | |
|---|---|
| 1610680 | M1610680 | Vergaser | Vergaßer | Gaser | Zerstäuber | Carburator | Carburettor | Carburetor | Carb | Carburateur | Carburatore | Carburador | Vergaserkit | Vergaserset | Vergaser | Set | Vergaser | Kit | |
Related items
variants
OEM-Qualität
BGM4420
Bell mouth -OEM QUALITY - 28-35mm (l= 60mm)
BGM4420
1 further versions from €11.65
-
The item is ordered and will be in stock soonconnection size Ø=28-35mm (l=60mm)
-
Available immediately (delivery time 1-3 working days*)connection size Ø=42mm (l=75mm)
-
Available immediately (delivery time 1-3 working days*)connection size Ø=52mm (l=75mm)
-
Available immediately (delivery time 1-3 working days*)connection size Ø=54mm (l=45mm)
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Malossi
4350089
Choke cable -MALOSSI- universal for Dellorto PHBH, PHBL, VHST
4350089
The item is ordered and will be in stock soon
€8.45
*
*incl. VAT plus shipping costs
variants
Dellorto
5350009
Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
5350009
further versions from €5.45
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Ersatzteile
variants
Dellorto
5350009
Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
5350009
further versions from €5.45
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
The item is ordered and will be in stock soongefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Recently viewed items