Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -MALOSSI MHR- Piaggio 50cc 2-stroke
Part no.:
M537600
Description
MALOSSI MHR Racing Shaft solid cheek shaft in Race design.
Very high quality processed and executed racing shaft, where the cheeks are made of solid metal. This provides due to the full weight of the shaft for a smooth engine running.
The HPC (= High-Primary-Compression) version also increases the pre-compression, which leads to a better filling of the cylinder over the entire speed range.
The bearing is for a racing shaft with silver cages!
AI-translation
Very high quality processed and executed racing shaft, where the cheeks are made of solid metal. This provides due to the full weight of the shaft for a smooth engine running.
The HPC (= High-Primary-Compression) version also increases the pre-compression, which leads to a better filling of the cylinder over the entire speed range.
The bearing is for a racing shaft with silver cages!
AI-translation
€273.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 12x17x16mm |
| Gudgeon pins | |
| diameter: | 12 mm |
| Crankshafts | |
| stroke: | 39.3 mm |
| thread rotor side: | M10x1,25 right-hand thread |
| thread drive side: | M10x1,25 right-hand thread |
| diameter crankwebs: | 70 mm |
| width crankwebs: | 40 mm |
| diameter bearing seat rotor side: | 20 mm |
| diameter bearing seat drive side: | 20 mm |
| diameter oil seal seat rotor side: | 19 mm |
| diameter oil seal seat drive side: | 18 mm |
| full circle crankshaft: | |
| filling material for full circle: | steel |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| diameter variator pivot: | 14.8 mm |
| variator pivot type: | toothed |
| can be used with genuine variator: | yes |
| Connecting rods | |
| length connecting rod: | 80 mm |
| thickness connecting rod: | 4.7 mm |
| diameter small end connecting rod eye: | 17 mm |
| lubricating hole at small end bearing: | yes |
| diameter crankpin: | 16 mm |
| lubricating hole at crankpin bearing: | slot |
| crankpin shims: | yes |
| OEM numbers (for comparison purposes only) | |
| Malossi | 537600, M537600 |
| Customers alternatively searched for | |
|---|---|
| 537600 | M537600 | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | |
Related items
Piaggio
1286162
Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke
1286162
The item is ordered and will be in stock soon
€12.25
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items