Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Crankshaft -CM Standard- Minarelli 50cc vertical (for 10mm gudgeon pin) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO

R100010010
Crankshaft -CM Standard- Minarelli 50cc vertical (for 10mm gudgeon pin) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO
Crankshaft -CM Standard- Minarelli 50cc vertical (for 10mm gudgeon pin) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO
Crankshaft -CM Standard- Minarelli 50cc vertical (for 10mm gudgeon pin) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO
Crankshaft -CM Standard- Minarelli 50cc vertical (for 10mm gudgeon pin) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO

Description


With the CM Standard Crankshaft we can offer you an inexpensive crankshaft that is a direct replacement for your original shaft. With brand-new gears and grooves, screwing is fun again.

Similar to the original shafts you will find sufficiently dimensioned lubrication holes and slots.
AI-translation

 
This item is currently not available.
€72.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
Bearings
sizes: 10x14x13mm
Gudgeon pins
diameter: 10 mm
Crankshafts
stroke: 40.2 mm
thread rotor side: M10x1,25 right-hand thread
thread drive side: M10x1,25 right-hand thread
diameter crankwebs: 68.9 mm
width crankwebs: 37.8 mm
diameter bearing seat rotor side: 20 mm
diameter bearing seat drive side: 20 mm
diameter oil seal seat rotor side: 20 mm
diameter oil seal seat drive side: 20 mm
full circle crankshaft:
rotary valve crankshaft:
crankcase has to be milled:
engine casing has to be modified:
diameter variator pivot: 12.8 mm
variator pivot type: toothed
can be used with genuine variator: yes
Connecting rods
length connecting rod: 80 mm
thickness connecting rod: 5.2 mm
diameter small end connecting rod eye: 14 mm
lubricating hole at small end bearing: yes
diameter crankpin: 16 mm
lubricating hole at crankpin bearing: slot
crankpin shims: no
Please inform me once the product is available again.
Customers alternatively searched for
Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore
With the CM Standard Crankshaft we can offer you an inexpensive crankshaft that is a direct...Continue reading

Fits the following vehicles


Ersatzteile


Small end needle bearing -OEM QUALITY (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
OEM-Qualität
3710017
OEM-Qualität
Small end needle bearing -OEM QUALITY (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
Available immediately (delivery time 1-3 working days*)
€7.49 *
*incl. VAT plus shipping costs
Small end needle bearing -ITALKIT (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH) - silver cage
Italkit
7671690
Italkit
Small end needle bearing -ITALKIT (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH) - silver cage
Available immediately (delivery time 1-3 working days*)
€11.65 *
*incl. VAT plus shipping costs
Small end needle bearing -BGM ORIGINAL (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
bgm Original
BGM0330
bgm Original
Small end needle bearing -BGM ORIGINAL (10x14x13mm)- Minarelli 50cc, Morini 50cc (type AH)
Available immediately (delivery time 1-3 working days*)
€7.98 *
*incl. VAT plus shipping costs
Recently viewed items