Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -CM Super Competition- Minarelli 50cc vertical (for 10mm gudgeon pin) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO
Part no.:
R100030011
Description
The CM SUPER COMPETITION - HPC - racing shaft is manufactured to the highest standards. The Red -Pads- are made of a high tech polymer and are used to increase the pre-compression (and thus to better fill the cylinder with highly ignitable mixture). The connecting rod is fitted with SSC race bearings at both ends and is also polished.
AI-translation
AI-translation
€96.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 10x14x13mm |
| Gudgeon pins | |
| diameter: | 10 mm |
| Crankshafts | |
| stroke: | 40.2 mm |
| thread rotor side: | M10x1,25 right-hand thread |
| thread drive side: | M10x1,25 right-hand thread |
| diameter crankwebs: | 68.8 mm |
| width crankwebs: | 37.1 mm |
| diameter bearing seat rotor side: | 20 mm |
| diameter bearing seat drive side: | 20 mm |
| diameter oil seal seat rotor side: | 20 mm |
| diameter oil seal seat drive side: | 20 mm |
| full circle crankshaft: | |
| filling material for full circle: | plastic |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| diameter variator pivot: | 12.8 mm |
| variator pivot type: | toothed |
| can be used with genuine variator: | yes |
| Connecting rods | |
| length connecting rod: | 80 mm |
| thickness connecting rod: | 5 mm |
| diameter small end connecting rod eye: | 14 mm |
| lubricating hole at small end bearing: | yes |
| diameter crankpin: | 16 mm |
| lubricating hole at crankpin bearing: | slot |
| crankpin shims: | yes |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | |
Related items
bgm Original
R100689000
Cylinder gasket set -BGM ORIGINAL 50cc- Minarelli 50cc AC (vertical cylinder) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO
R100689000
The item is ordered and will be in stock soon
€4.50
*
*incl. VAT plus shipping costs
Alternative items
CM
R100010010
Crankshaft -CM Standard- Minarelli 50cc vertical (for 10mm gudgeon pin) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, SR50 (-1994), STUNT, ZUMA50, AMICO
R100010010
The item is ordered and will be in stock soon
€72.00
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items