Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Carburator -MIKUNI 27mm TMX27- manual choke, Powerjet, autolube - CS=36mm

TM278006
Carburator -MIKUNI 27mm TMX27- manual choke, Powerjet, autolube - CS=36mm
Carburator -MIKUNI 27mm TMX27- manual choke, Powerjet, autolube - CS=36mm
Carburator -MIKUNI 27mm TMX27- manual choke, Powerjet, autolube - CS=36mm
Carburator -MIKUNI 27mm TMX27- manual choke, Powerjet, autolube - CS=36mm
Carburator -MIKUNI 27mm TMX27- manual choke, Powerjet, autolube - CS=36mm

Description


The carburettors from the Japanese manufacturer Mikuni are in the reference class when it comes to perfect tunability and thus the highest achievable performance with optimum consumption. Mikuni carburettors and parts are manufactured with tolerances of 5/1000ths. This is one of the reasons why they run so perfectly. However, you should take a little time for tuning, because Mikuni carburettors do not run with any carburettor equipment, but only with the really suitable one. But they run perfectly and you don't expose the engine to the risk that it only runs cleverly in some partial load ranges and then goes up in one of the other partial load ranges.

The TMX 27 also offers the possibility to tune the carburettor leaner in the medium speed and slide range with the Powerjet jet to gain power and reduce consumption. To avoid a lean tuning in the upper slide and speed range the Powerjet nozzle is used which delivers additional fuel into the intake flow due to the high vacuum at full throttle and high speeds. The TMX 27 is one of the few large carburetors with a connection for fresh oil. This makes this carburettor especially interesting for the large automatic engines that do not want to do without an oil pump in spite of tuning in everyday use. The Mikuni carburettors react quickly to fine contamination of the fuel with an overflow of the float chamber. Therefore, ideally use a good fuel filter here.

  • Main nozzle: 150
  • Idle jet: 30
  • Needle jet: N-9 ( 622 )
  • Nozzle needle: 6E20-3
  • Starter nozzle: fixed
  • Idle jet propeller: 2.0 turn
  • Main air nozzle: fixed
  • Power Jet nozzle: 85
  • Gas slide: 4.0
  • Needle valve: 2.5
  • Float level: 13mm
  • Choke actuation: left / lever
  • Standing gas screw: left
  • Air screw: left
  • Outer diameter front: 36mm
  • Outer diameter rear: 50mm
  • Overall length: 88mm
  • measurement center venturi up: 82mm
  • measurement center venturi down: 77mm
  • fresh oil connection: right
  • fuel supply: left

AI-translation

 
€219.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Carburettors
size venturi: 27 mm
size main jet: 150
main jet type: Mikuni (4/042)
size pilot jet: 30
idle jet type: Mikuni (VM22/210)
size needle: 6E20
needle type: Mikuni
size atomiser: N-9 (Serie 622)
power jet:
size power jet: 85
power jet type: Mikuni (N100606)
size slide: 4
slide type: D-shaped slide
choke type: manual lever
mounting type air filter: rigid
connection size air filter: 50 mm
mounting type intake manifold: rubber mounted
connection size intake manifold: 36 mm
idle gas screw: left hand side
fuel/air mixture screw position: left hand side
fuel hose position: left hand side
depth: 88 mm
connection height (relative): 77 mm
material float chamber: metal
connector for oil hose:
vacuum connection:
Customers alternatively searched for
Vergaser | Vergaßer | Gaser | Zerstäuber | Carburator | Carburettor | Carburetor | Carb | Carburateur | Carburatore | Carburador |
The carburettors from the Japanese manufacturer Mikuni are in the reference class when it comes...Continue reading

Ratings


2 May 2020
Mikuni

Great cooperation. Good carburettor for suzuki tsr 125

19 Dec 2015

carburateur niquel por mon suzuki 125 tsr
merci

Alternative items


Carburator -DELLORTO 28mm VHST BS 4T- CS=34mm - COD. 9356
Dellorto
DEL3050
Dellorto
Carburator -DELLORTO 28mm VHST BS 4T- CS=34mm - COD. 9356
Available immediately (delivery time 1-3 working days*)
€169.00 *
*incl. VAT plus shipping costs
Carburator -DELLORTO 28mm VHST BS 2T Racing- CS=34mm - COD. 9381
Dellorto
DEL3050R
Dellorto
Carburator -DELLORTO 28mm VHST BS 2T Racing- CS=34mm - COD. 9381
The item is ordered and will be in stock soon
€199.00 *
*incl. VAT plus shipping costs
Carburator -KEIHIN PWK 28mm manual choke - CS=34mm - Adjusting screws rhs
Keihin
KH280000
Keihin
Carburator -KEIHIN PWK 28mm manual choke - CS=34mm - Adjusting screws rhs
Available immediately (delivery time 1-3 working days*)
€279.00 *
*incl. VAT plus shipping costs
Carburator -DELLORTO PHBH 28 BS- CS=34mm
Dellorto
1510008
Dellorto
Carburator -DELLORTO PHBH 28 BS- CS=34mm
Available immediately (delivery time 1-3 working days*)
€138.00 *
*incl. VAT plus shipping costs

Ersatzteile


Float valve -MIKUNI TMX 27, TMX 30- 2,5
Mikuni
78636008
Mikuni
Float valve -MIKUNI TMX 27, TMX 30- 2,5
Available immediately (delivery time 1-3 working days*)
€40.95 *
*incl. VAT plus shipping costs
Fuel/air mixture screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38
bgm Pro
7900055
bgm Pro
Fuel/air mixture screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38
Available immediately (delivery time 1-3 working days*)
€9.90 *
*incl. VAT plus shipping costs
Float chamber -MIKUNI- TMX 27, TMX 30
Mikuni
9110045
Mikuni
Float chamber -MIKUNI- TMX 27, TMX 30
Available immediately (delivery time 1-3 working days*)
€61.00 *
*incl. VAT plus shipping costs
Recently viewed items