Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Carburator -MIKUNI 30mm TMX30- manual choke, Powerjet - CS=36mm

TM308006
Carburator -MIKUNI 30mm TMX30- manual choke, Powerjet - CS=36mm
Carburator -MIKUNI 30mm TMX30- manual choke, Powerjet - CS=36mm
Carburator -MIKUNI 30mm TMX30- manual choke, Powerjet - CS=36mm
Carburator -MIKUNI 30mm TMX30- manual choke, Powerjet - CS=36mm
Carburator -MIKUNI 30mm TMX30- manual choke, Powerjet - CS=36mm

Description


The carburettors from the Japanese manufacturer Mikuni are in the reference class when it comes to perfect tunability and thus the highest achievable performance with optimum consumption. Mikuni carburettors and parts are manufactured with tolerances of 5/1000ths. This is one of the reasons why they run so perfectly. However, you should take a little time for tuning, because Mikuni carburettors do not run with any carburettor equipment, but only with the really suitable one. But they run perfectly and you don't expose the engine to the risk that it only runs cleverly in some partial load ranges and then goes up in one of the other partial load ranges.

The TMX 30 also offers the possibility to tune the carburettor leaner in the medium speed and slide range with the Powerjet nozzle to gain power and reduce consumption. In order to avoid a lean tuning in the upper slide and speed range, the Powerjet nozzle is used there which, due to the high negative pressure at full throttle and high speeds, additionally feeds petrol into the intake flow.

The Mikuni carburettors react quickly to fine contamination of the fuel by overflowing the float chamber. Therefore, ideally use a good fuel filter.

The standard Mikuni TM30 is quite good in most cases, but on automatic engines the side jet should be located in the range 15-17.5.

  • Main nozzle: 195
  • Idle nozzle: 40
  • Needle nozzle: N-9 ( 622 )
  • Nozzle needle: 5EL68-3
  • Starter nozzle: fixed
  • Idle airscrew: 2.5 turns
  • Main air nozzle: 0.8 - fixed
  • Power Jet nozzle: 80
  • Gas slide: 4.0
  • Needle valve: 2.5
  • Float level: 13mm
  • Choke actuation: left / button
  • Standing gas screw: left
  • Air screw: left
  • Outside diameter front: 36mm
  • Outside diameter rear: 50mm
  • Overall length: 88mm
  • measurement middle venturi upwards: 82mm
  • measurement middle venturi downwards: 77mm
  • fuel supply: left

AI-translation

 
This item is currently not available.
€219.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

Estimated delivery date: 25/03/2024

P For this item you get fidelity point/s
Carburettors
size venturi: 30 mm
size main jet: 195
main jet type: Mikuni (4/042)
size pilot jet: 40
idle jet type: Mikuni (VM22/210)
size needle: 5EL68
needle type: Mikuni
size atomiser: N-9 (Serie 622)
power jet:
size power jet: 80
power jet type: Mikuni (N100606)
size slide: 4
slide type: D-shaped slide
choke type: manual button
mounting type air filter: rigid
connection size air filter: 50 mm
mounting type intake manifold: rubber mounted
connection size intake manifold: 36 mm
idle gas screw: left hand side
fuel/air mixture screw position: left hand side
fuel hose position: left hand side
depth: 88 mm
connection height (relative): 77 mm
material float chamber: metal
connector for oil hose:
vacuum connection:
Please inform me once the product is available again.
Customers alternatively searched for
Vergaser | Vergaßer | Gaser | Zerstäuber | Carburator | Carburettor | Carburetor | Carb | Carburateur | Carburatore | Carburador |
The carburettors from the Japanese manufacturer Mikuni are in the reference class when it comes...Continue reading

Ratings


14 Apr 2016

top Vergaser, einfach und schnell einzustellen

29 Feb 2016

Sehr gutes Produkt!! Leider keine Beschreibung dabei!

Alternative items


Carburator -DELLORTO PHBH 30 BS- CS=34mm
Dellorto
1510009
Dellorto
Carburator -DELLORTO PHBH 30 BS- CS=34mm
Available immediately (delivery time 1-3 working days*)
€154.00 *
*incl. VAT plus shipping costs

Ersatzteile


Float valve -MIKUNI TMX 27, TMX 30- 2,5
Mikuni
78636008
Mikuni
Float valve -MIKUNI TMX 27, TMX 30- 2,5
Available immediately (delivery time 1-3 working days*)
€40.95 *
*incl. VAT plus shipping costs
Float chamber -MIKUNI- TMX 27, TMX 30
Mikuni
9110045
Mikuni
Float chamber -MIKUNI- TMX 27, TMX 30
Available immediately (delivery time 1-3 working days*)
€61.00 *
*incl. VAT plus shipping costs
Caburator top cap -MIKUNI- TMX30 (Mikuni TM30/28 for TM30-8006)
Mikuni
TM30-28
Mikuni
Caburator top cap -MIKUNI- TMX30 (Mikuni TM30/28 for TM30-8006)
Available immediately (delivery time 1-3 working days*)
€28.95 *
*incl. VAT plus shipping costs
Recently viewed items