Évaluer
Les évaluations seront publiées après vérification.

Les champs avec un * sont obligatoires.
En cliquant sur "Envoyer" ou "Valider" j'accepte que mes données personnelles soient traitées conformément à la politique de confidentialité de SCOOTER CENTER GmbH.

 
 
L'article a été ajouté.

Engrenage primaire -DRT pour rapport de transmission 2.34- Vespa V50, PV125, ET3, PK50, PK80, PK125 - Z29 (2,34->2,34)

3333180
Engrenage primaire -DRT pour rapport de transmission 2.34- Vespa V50, PV125, ET3, PK50, PK80, PK125 - Z29 (2,34->2,34)
Engrenage primaire -DRT pour rapport de transmission 2.34- Vespa V50, PV125, ET3, PK50, PK80, PK125 - Z29 (2,34->2,34)
Engrenage primaire -DRT pour rapport de transmission 2.34- Vespa V50, PV125, ET3, PK50, PK80, PK125 - Z29 (2,34->2,34)

Description


The pinion offered here, from the manufacturer DRT, is one of three that is suitable for use with a commercial 29/68 (2.34) ratio in the Vespa small frame engines.

An original 125cc small frame Vespa (such as a Primavera or PK) originally uses a primary gear ratio in the transmission of 24/61 (2.54).
Therefore, the 29/68 (2.34) is already significantly longer and also only in very few Motore also really usable. This is due to the power required to overcome the air resistance, which increases more and more with increasing speed. Since this increases in the square, i.e. double speed means four times the air resistance. A smallframe engine can deliver a lot of power with the appropriate tuning, but of course it no longer does so at the level of a series engine. Often the full power is only available at well over 8000 rpm.

That is, he would already be much faster even with the standard gear ratio, because he can turn out much further. On the other hand a strong engine has the full power only in the upper speed range, in the speed cellar this is usually missing.

If you extend the final ratio of such an engine so drastically as with a 29/68 (2.34) primary, this often causes problems with the gear connection in the upper gears or it can happen that the engine in fourth gear can not reach its full speed at all because it is slowed down by the driving resistance and can not reach the speed range of full power.

DRT therefore offers three pinions for the 29/68 (2.34) reduction:

  • 27 teeth (2.52)
  • 28 teeth (2.43)
  • 30 teeth (2.26)

Thus, the first two can be used to shorten the reduction ratio, while the 30-tooth pinion extends the reduction ratio significantly.

This can be useful if, for example, an extremely short-ratio gearbox is used with the help of the so-called matrix auxiliary shaft and the 47-tooth Parma 4th gear. In this case, the ratio of the matrix auxiliary shaft and the Parma gear wheel would result in a secondary transmission ratio of 18/47 (2.61). In combination with a primary with 29/68 (2.34) which was changed to 30/68 (2.26) with the help of the DRT 30 tooth sprocket, this would result in a total gear ratio that would correspond to a length as would be achieved in combination with a standard gearbox and 29/68 (2.34) primary.

Now, however, with the huge advantage of the closely spaced gear jumps, due to the matrix auxiliary shaft with Parma pinion. So the chance that an engine can really pull such a long gear increases considerably, because it no longer falls out of the so-called resonance range, in which the exhaust fully supports the engine.

(TW070122)

AI-translation

 
Cet article n'est pas disponible pour le moment.
51,99 €

TVA incl., hors frais de port

Cet article a déjà été commandé et sera disponible bientôt.
P Pour cet article vous recevez point/s de fidélité
Je vous prie de m'informer par e-mail quand le produit sera de nouveau disponible.
Les clients recherchaient alternativement
Primärrad | Antriebsrad | Antriebsritzel | Getriebezahnrad | Vorgelegezahnrad | Vorgelegerad | Primärzahnrad | Primäres | Rad | Übersetzung | Primäre | Untersetzung | Getriebe | Topspeed | Endgeschwindigkeit | Höhere | Primary | Drive | Wheel | Pignon Primaire | Pignone | Piñón Transmisión Primaria |

Versions disponibles

Réf. : Nombre de dents Prix Stock Panier Sauvegarder
Réf. : 7674083 Nombre de dents 27 Zähne Prix
53,99 €
Stock
Disponible immédiatement (délai de livraison 1-3 jours ouvrables*)
Panier Sauvegarder
Réf. : 7670446 Nombre de dents 28 dents Prix
56,95 €
Stock
Cet article a déjà été commandé et sera disponible bientôt.
Panier
Sauvegarder
Réf. : 3333180 Nombre de dents 29 Zähne Prix
51,99 €
Stock
Cet article a déjà été commandé et sera disponible bientôt.
Panier
Sauvegarder
Réf. : 7674084 Nombre de dents 30 Zähne Prix
55,99 €
Stock
Disponible immédiatement (délai de livraison 1-3 jours ouvrables*)
Panier Sauvegarder
The pinion offered here, from the manufacturer DRT, is one of three that is suitable for use with...Lire la suite

Évaluations


16 mars 2015

Top

Derniers produits consultés