Write a review
Evaluations will be activated after verification.
Item successfully added.
Carburator -DELLORTO 16/16mm SHB- Vespa PK50 S/XL
Part no.:
1510015
Description
The SHB series is the classic among scooter carburettors. On nearly every small frame this successful carburettor type was used.
The carburettor works without needle and has only one main jet (5mm thread) and a choke jet accessible from the outside. On the Vespa Smallframe circuit models with 50cc the following variants were used:
V50 (40km/h) | SHB 16/10 |
PK50 XL2 | SHB 16/15F |
V50, 50N, PK50XL | SHB 16/16 |
All 50-85cc engines should use at least the 16/16mm carb.
Engines equipped with a SHB16/10 carburetor require the intake manifold of the SHB16/16 models for conversion. The 16mm cross section is sufficient for cylinders up to and including 85cc. From 100cc on you should convert to a 19mm carburettor.
There are SHB carburettors for V50, 50N and PK models.
V50/50N use stud bolts for the sheet metal air filter
PK models have a plastic filter which is clamped
NOTE: This carburettor type is normally sealed with a felt ring in the cast protective cap. However, Dell'Orto has switched production of this carburettor to sealing with an O-ring. Therefore the carburettor is further turned out at the connection to the intake manifold. Please make sure that the carburettor is pushed far enough onto the connection. Possibly the cast protective cap must be modified at the slots of the guide noses somewhat, so that it can slip further on the connecting piece.
AI-translation
€109.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Carburettors | |
|---|---|
| size venturi: | 16 mm |
| size main jet: | 70 |
| main jet type: | Dellorto 5mm (1486) |
| size pilot jet: | 38 |
| idle jet type: | Dellorto SH (3360) |
| size choke jet: | 50 |
| power jet: | |
| size slide: | 6231.2 |
| slide type: | flat slide |
| choke type: | manual, cable |
| mounting type air filter: | rigid |
| connection size air filter: | 62 mm |
| mounting type intake manifold: | clamp-connection |
| connection size intake manifold: | 21.5 mm |
| idle gas screw: | on top |
| fuel/air mixture screw position: | right hand side |
| fuel hose position: | left hand side |
| connection size fuel hose: | 7 mm |
| height: | 111 mm |
| width: | 66 mm |
| depth: | 82 mm |
| connection height (relative): | 42.5 mm |
| fitting type: | M6 x 0.75 |
| material float chamber: | plastic |
| connector for oil hose: | |
| vacuum connection: | |
| OEM numbers (for comparison purposes only) | |
| Dellorto | 00879 |
| Customers alternatively searched for | |
|---|---|
| Vergaser | Vergaßer | Gaser | Zerstäuber | Carburator | Carburettor | Carburetor | Carb | Carburateur | Carburatore | Carburador | | |
The SHB series is the classic among scooter carburettors. On nearly every small frame this...Continue reading
Fits the following vehicles
- Vespa (Piaggio) PK 50 XL2 (V5N1T)
- Vespa (Piaggio) PK 50 XL2 HP (V5N2T)
- Vespa (Piaggio) PK 50 SS (V5S1T)
- Vespa (Piaggio) PK 50 XLS (V5S2T)
- Vespa (Piaggio) PK 50 (V5X1T)
- Vespa (Piaggio) PK 50 S (V5X2T)
- Vespa (Piaggio) PK 50 S Lusso (V5X2T)
- Vespa (Piaggio) PK 50 XL (V5X3T)
- Vespa (Piaggio) PK 50 XL Rush (V5X4T)
- Vespa (Piaggio) PK 50 N (V5X5T)
- Vespa (Piaggio) PK 50 XL2 (V5X3T)
Blog
Ratings
From:
customer
On:
31 Jul 2017
Passt wackelt läuft gerne wieder
Related items
variants
Dellorto
5350042
Float needle -DELLORTO, triangular- SHBC (Vespa V50, PV,ET3, SHA (Ciao, Bravo, SI), PHBG, PHVA, PHVB, PHBN, FHBB - not spring loaded
5350042
further versions from €5.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8503S
Float needle -BGM PRO- suitable for DELLORTO, triangular- SHBC (Vespa V50, PV,ET3), PHBG, PHVA, PHVB, PHBN, FHBB - not spring loaded
BGM8503S
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8503F
Float needle -BGM PRO- suitable for DELLORTO, triangular- PHBG, PHVA, PHVB, PHBN, FHBB - spring loaded
BGM8503F
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Ersatzteile
variants
Dellorto
5350042
Float needle -DELLORTO, triangular- SHBC (Vespa V50, PV,ET3, SHA (Ciao, Bravo, SI), PHBG, PHVA, PHVB, PHBN, FHBB - not spring loaded
5350042
further versions from €5.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8503F
Float needle -BGM PRO- suitable for DELLORTO, triangular- PHBG, PHVA, PHVB, PHBN, FHBB - spring loaded
BGM8503F
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8503S
Float needle -BGM PRO- suitable for DELLORTO, triangular- SHBC (Vespa V50, PV,ET3), PHBG, PHVA, PHVB, PHBN, FHBB - not spring loaded
BGM8503S
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Recently viewed items