Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Crankshaft -MAZZUCCHELLI Standard (rotary valve)- Vespa V50, PK50 S (Ø=19mm cone)

1610001
Crankshaft -MAZZUCCHELLI Standard (rotary valve)- Vespa V50, PK50 S (Ø=19mm cone)
Crankshaft -MAZZUCCHELLI Standard (rotary valve)- Vespa V50, PK50 S (Ø=19mm cone)
Crankshaft -MAZZUCCHELLI Standard (rotary valve)- Vespa V50, PK50 S (Ø=19mm cone)
Crankshaft -MAZZUCCHELLI Standard (rotary valve)- Vespa V50, PK50 S (Ø=19mm cone)

Description


The standard crankshafts for the V50 are very well suited to replace the old original shafts, with bushings instead of needle bearings in the upper connecting rod eye. This brings a strongly increased life span of the engine with itself, since the connecting rod bushings become frequently unround, and/or deflect with the time.

TIP:

For cylinders starting from 75cc capacity directly a broader upper connecting rod bearing also order! (see "Accessories")


AI-translation

 
€107.94 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Bearings
sizes: 12x17x13mm
Gudgeon pins
diameter: 12 mm
Crankshafts
stroke: 43 mm
thread rotor side: M10x1,5 right-hand thread
thread drive side: M10x1,5 right-hand thread
diameter crankwebs: 87 mm
width crankwebs: 37.6 mm
diameter bearing seat rotor side: 20 mm
diameter bearing seat drive side: 17 mm
diameter oil seal seat rotor side: 19 mm
diameter oil seal seat drive side: 22.7 mm
full circle crankshaft:
rotary valve crankshaft:
length rotary crankweb: 201 mm
Vespa V50, PV - intake timing for short rotary surface (22mm) (°): 117
Vespa PK XL2, ETS - intake timing for long rotary surface (28mm) (°): 123
Vespa PK XL2, ETS - intake timing for long rotary surface (37mm fully modified) (°): 133
crankcase has to be milled:
engine casing has to be modified:
Connecting rods
length connecting rod: 97 mm
thickness connecting rod: 4.8 mm
diameter small end connecting rod eye: 17 mm
lubricating hole at small end bearing: yes
diameter crankpin: 20 mm
lubricating hole at crankpin bearing: notch
crankpin shims: yes
OEM numbers (for comparison purposes only)
Piaggio 224587, 2245875, 1961056, 90203, 112154
Customers alternatively searched for
Crankshaft | Crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | Vanne Rotative | Válvula Rotativa | Valvola A Disco Rotante | Rotary Valve

Ersatzteile


Small end needle bearing -OEM QUALITY (12x17x15mm)- Piaggio 50cc, Vespa 50cc
OEM-Qualität
3710015
OEM-Qualität
Small end needle bearing -OEM QUALITY (12x17x15mm)- Piaggio 50cc, Vespa 50cc
Available immediately (delivery time 1-3 working days*)
€5.89 *
*incl. VAT plus shipping costs
Small end needle bearing -ITALKIT (12x17x15mm)- Piaggio 50cc, Vespa 50cc - silver cage
Italkit
7671695
Italkit
Small end needle bearing -ITALKIT (12x17x15mm)- Piaggio 50cc, Vespa 50cc - silver cage
Available immediately (delivery time 1-3 working days*)
€13.85 *
*incl. VAT plus shipping costs
Small end needle bearing -BGM ORIGINAL (12x17x15mm)- Piaggio 70/80cc, Vespa 50cc
bgm Original
BGM0334
bgm Original
Small end needle bearing -BGM ORIGINAL (12x17x15mm)- Piaggio 70/80cc, Vespa 50cc
Available immediately (delivery time 1-3 working days*)
€9.95 *
*incl. VAT plus shipping costs
Recently viewed items