Write a review
Evaluations will be activated after verification.
Item successfully added.
Exhaust -OEM QUALITY- Vespa PV125
Part no.:
2020020
Description
Exhaust -Replica- Vespa PV125.
The replica exhaust is characterized by a very thick plate thickness, which is at least on the original manufacturer's level. The exhaust system is excellently processed. In short, you will find here an exhaust that combines good fit and durability.
Even years old exhaust systems are often so coked from the inside with deposits that the driving values suffer significantly. In the worst case this can lead to overheating of the engine.
AI-translation
The replica exhaust is characterized by a very thick plate thickness, which is at least on the original manufacturer's level. The exhaust system is excellently processed. In short, you will find here an exhaust that combines good fit and durability.
Even years old exhaust systems are often so coked from the inside with deposits that the driving values suffer significantly. In the worst case this can lead to overheating of the engine.
NOTE:
As with the original Piaggio exhaust systems, the same mufflers are used for both the 50cc and 125cc models.
The difference in size both in height and circumference of the cylinders is compensated here by slotted holes. It may be necessary to bend the mounting bracket to fit the installation conditions.
The exhaust fits best out of the box on the 50ccm models. Please make sure that the exhaust is not under tension after mounting. This means that the exhaust must not be pulled into position with the mounting screws. If this would be necessary, it must be adjusted before the final assembly.
AI-translation
€55.95 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| General | |
|---|---|
| performance class: | standard |
| Exhausts | |
| look: | standard |
| material exhaust body: | steel |
| finish exhaust body: | painted shiny |
| exhaust manifold incl.: | |
| Colour | |
| main colour: | transparent |
| Cylinders | |
| engine type: | 2-stroke |
| exhaust mounting: | flange |
| flange type: | 2 studs |
| exhaust bolt pitch: | 56 mm |
| OEM numbers (for comparison purposes only) | |
| Piaggio | 393384, 120218 |
| Customers alternatively searched for | |
|---|---|
| Auspuff | Schalldämpfer | Resonanzkörper | Pott | Endtopf | Abgasanlage | Exhaust | Pipe | Expansion Chamber | Silencer | Muffler | Pot D'Échappement | Marmitta | Escape | | |
Related items
Loctite
3600017
Liquid gasket -LOCTITE omniVISC® 1050- 90g
3600017
The item is ordered and will be in stock soon
€29.90
*
Unit
90 g
(€0.33
* / 1 g)
*incl. VAT plus shipping costs
Recently viewed items