incl. VAT plus shipping costs
Engine revision set Lambretta
We offer you three revision sets for your Lambretta engine. In this simple set you will find all the parts you need to overhaul an engine that is in good condition anyway. Here you will find virtually all engine bearings, seals, shaft seals, new silent blocks and other wear parts that are usually needed.
Included in the scope of delivery:
1. Complete engine mount set dl/GP. It can also be used for the Li/SX models if the distance ring is not installed in the maghousing. So the wider NU2205 bearing of the dl/GP also fits the earlier models.
6305 ball bearing drive side crankshaft - SKF or FAG
NU2205 ball bearing alternator side - SKF or FAG
ball bearing rear wheel - bgm PRO
6004 Ball bearing auxiliary shaft - SKF or FAG
Coupling bush dl/GP - bgm PRO
Needle bearing -K- (24x28x10 mm) Spider/pinion LI/SX/TV/GT (2 pieces) - SKF or FAG
Needle bearing -K- (16x22x12 mm) Auxiliary shaft/motor housing - SKF or FAG
2. Complete engine seal set - 29 parts. Fits 125, 150, 175 and 200 ccm.
3. Seegeringsatz MB Developments. All Seegerings used except for those in Maghousing (Art. No. 8002140).
4. Complete O-Ring Set MB Developments. For main shaft, rear brake arm, shift and clutch shaft.
5. Silent block set bgm PRO
6. Pressure plate set for chain tensioner.
7. Screw hexagon socket M6 x 16 mm (4 pieces) for fixing the cover plate for the 6305 bearing on the drive side.
8. L-ring fan wheel housing
9. Kickstarter piston bolt MB Developments
10. Clutch nut M14 x 1,5
11. Clutch nut locking plate
12. M6 washers - 100 pieces - cheaper in 100er set
With the shaft seal set you can choose between MB Developments (inner crankshaft seals made of FPM), Jockeys Boxenstop (inner crankshaft seals made of FPM) and Casa Lambretta (all shaft seals made of FPM).
Some parts are not included in the set, because the choices are too big. This includes clutch revision parts, front sprocket, chain tensioner, chain, 6305 bearing cover plate, cylinder stud, kick starter shaft, shift claw and engine adjusters.