Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Intake manifold kit incl. reed valve block -MMW- Piaggio 2-stroke Maxi - CS=36mm, for carb Ø=28mm

7670425
Intake manifold kit incl. reed valve block -MMW- Piaggio 2-stroke Maxi - CS=36mm, for carb Ø=28mm
Intake manifold kit incl. reed valve block -MMW- Piaggio 2-stroke Maxi - CS=36mm, for carb Ø=28mm
Intake manifold kit incl. reed valve block -MMW- Piaggio 2-stroke Maxi - CS=36mm, for carb Ø=28mm
Intake manifold kit incl. reed valve block -MMW- Piaggio 2-stroke Maxi - CS=36mm, for carb Ø=28mm
Intake manifold kit incl. reed valve block -MMW- Piaggio 2-stroke Maxi - CS=36mm, for carb Ø=28mm

Description


The MMW intake manifold allows the use of a large RD350YPVS diaphragm on the engine housings of Piaggio/Gilera 2 stroke engines. A useful conversion for carburettor sizes from 28mm and a displacement over 125cc.

The large diaphragm area is suitable for carburettors up to 38mm diameter. This allows the realization of extremely powerful engines where the original diaphragm would be completely overstrained. The connecting piece is perfect for a radical conversion of the engine concept to a good resonance exhaust and a large exhaust cross section. Then the larger crankcase volume and the resulting reduced pre-compression can be used to achieve a large increase in performance by using a large carburettor.

The connecting piece is available with two different connecting pieces:

  • For carburettors up to 28mm
  • For carburettors up to 35mm

The scope of delivery includes

  • Bottom part of intake manifold (diaphragm support)
  • Diaphragm BGM type RD350YPVS with GFK platelets
  • Bottom part of intake manifold with Ø28mm passage and Ø36mm connection width for Connection rubber
  • screws
  • gaskets for over/under the membrane

The distance between helmet compartment and carburettor should be checked individually on each vehicle. By raising the carburettor, it may be necessary to machine the helmet compartment to prevent enemy contact during compression.
Thanks to the precise CNC manufacturing of the parts, sealing compound is sufficient when assembling the intake.


AI-translation

 
This item is currently not available.
€239.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
Intake manifolds
fits type series: Scooter Maxi
connection size: 36 mm
material: aluminium
connection type: Gummiverbindung
Please inform me once the product is available again.
Customers alternatively searched for
Ansaugstutzen | Set | Ansauggummi | Ansaugbrücke | Ansauger | Ansaug Stutzen | Verbindungsstutzen | Ansaugstück | Schnüffelstück | Vergasergummi | Intake | Manifold | Kit | Incl. | Reed | Pipe D'Admission | Toma De Aspiración | Toma de admisión | Tobera | Collettore Aspirazione |

Available versions

Part no.: Connection size Price Stock Cart Save
Part no.: 7670425 Connection size connection size Ø=36mm (Øi=28mm) Price
€239.00
Stock
The item is ordered and will be in stock soon
Cart
Save
Part no.: 7670424 Connection size connection size Ø=40mm (Øi=35mm) Price
€238.00
Stock
The item is ordered and will be in stock soon
Cart
Save

Ersatzteile


Recently viewed items