Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal 20x42/43x8/9mm -MALOSSI PTFE/FKM- (used for crankshaft drive side Minarelli 50 cc (type MA, MY, CW, CA, CY), CPI 50 cc)

7675891
Oil seal 20x42/43x8/9mm -MALOSSI PTFE/FKM- (used for crankshaft drive side Minarelli 50 cc (type MA, MY, CW, CA, CY), CPI 50 cc)
Oil seal 20x42/43x8/9mm -MALOSSI PTFE/FKM- (used for crankshaft drive side Minarelli 50 cc (type MA, MY, CW, CA, CY), CPI 50 cc)

Description


Malossi uses the best materials for its shaft seals. They consist of steel cores covered with fluorinated rubber (FKM/FPM). The inner running surface, which has direct contact with the sealing surface of the crankshaft, is made of PTFE (polytetrafluoroethylene). Both materials are known under the trade names Viton and Teflon of the manufacturer DuPont. PTFE is extremely resistant to all acids, oils, greases, alcohols and fuels. Due to the increased alcohol content in today's fuel, shaft sealing rings with this material are recommended. In addition to their enormous wear resistance, they run with low friction, which makes them a must for all engines with higher speeds. Piaggio uses PTFE rings as standard in 125-180cc two-stroke engines such as the Runner or SKR. Also in the PX engines, the clutch side large shaft seal of the crankshaft is made of such a material (brown sealing lip).

  • Very low wear
  • Absolutely heat resistant
  • Extremely low frictional resistance
  • Resistant to almost all chemicals
  • Perfectly suitable for heavily tuned engines
  • Also applicable in the series engine

AI-translation

 
€9.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Oil seals
inner diameter: 20
outer diameter: 42/43
width: 8/9
sizes: 20x42/43x8/9
material: FPM, FKM
coating: PTFE
OEM numbers (for comparison purposes only)
Malossi 6618155B, M6618155B
Customers alternatively searched for
6614877B | M6614877B | Wellendichtring | 20 | 42 | 43 | 8 | 9 | Simmerring | Dichtring | Dichtung | Wedi | Wellendichtung | Oil | Seal | 20 | 42 | 43 | 8 | 9 | Joint Spi 20X42 43X8 9mm | Paraolio 20X42 43X8 9mm | Retén 20X42 43X8 9mm | Bourrage |
Malossi uses the best materials for its shaft seals. They consist of steel cores covered with...Continue reading

Fits the following vehicles


Ratings


15 Jul 2015

Das Besste was auf dem Markt gibt!

Recently viewed items