Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Engine gasket set -MADE IN INDIA- Lambretta LI 150, LIS 150, SX 150 DL/GP 150

8800006
Engine gasket set -MADE IN INDIA- Lambretta LI 150, LIS 150, SX 150 DL/GP 150
Engine gasket set -MADE IN INDIA- Lambretta LI 150, LIS 150, SX 150 DL/GP 150
Engine gasket set -MADE IN INDIA- Lambretta LI 150, LIS 150, SX 150 DL/GP 150
Engine gasket set -MADE IN INDIA- Lambretta LI 150, LIS 150, SX 150 DL/GP 150
Engine gasket set -MADE IN INDIA- Lambretta LI 150, LIS 150, SX 150 DL/GP 150

Description


All engine gaskets should always be replaced during an overhaul. The easiest way to do this is to lubricate the gaskets with a little grease to make them stick to the housing and prevent them from being bent or damaged during installation. Sealing compound is only necessary if the housing is defective (scores in the sealing surface or similar). If a healthy motor housing drips nevertheless, it is usually strained or crooked. A strained housing is caused by unevenly tightened housing screws. Ideally the housing halves should be tightened evenly (crosswise!) with a torque wrench. The maximum value here is after 6-8NM. A crooked housing is also often the cause of dripping motors. Mostly these are motors that have been welded before. Only a few specialist welding companies take care of a technically correct preheating and cooling of the housing. The biggest mistake is to make a welding operation on individual halves. Whenever possible, both halves should be held together with all motor bolts! Another common cause for leaking engines are defective O-rings. Small rubber rings, which usually lie in a groove made for them, seal corresponding components in the same way as the shaft seals.
AI-translation

 
€11.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Gaskets
number of gasskets: 13
o-rings incl.:
oil seals incl.:
head gasket incl.:
base gasket incl.:
reed valve gasket incl.:
valve stem seals incl.:
squeeze-type gasket incl.:
Customers alternatively searched for
Dichtsatz | Motor dichtsatz | Motorblockdichtungen | Motorblockdichtsatz | Komplettdichtsatz | Kompletter | Komplettsatz | Dichtungen | Dichtsatz | Motorgehäusedichtungen | Gasket | Set | Engine | Sealer | Covering | Sealing | Packing | Pochette De Joints Moteur | Guarnizioni Kit Motore | Kit De Juntas Para Motor | Empaquetadura |

Ratings


10 Feb 2019

****

26 Feb 2018

Discreta

3 Apr 2016

v.good

11 Nov 2015

tutto ok

9 Apr 2015

As it says on the tin

16 Mar 2015

ok excelente

Recently viewed items