Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Engine gasket set -OEM QUALITY- Lambretta LI 125, LIS 125, DL/GP 125

8800008
€9.98 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
All motor seals should always be replaced when overhauled. The easiest way is to lubricate the...Continue reading

Description


All motor seals should always be replaced when overhauled. The easiest way is to lubricate the seals with a little grease in order to glue them to the housing and thus prevent them from being bent or damaged during installation. Sealing compound is only necessary if the housing is defective (grooves in the sealing surface or similar). If a healthy engine housing still drips, it is usually tense or crooked. A strained housing is caused by unevenly tightened housing screws. Ideally, the housing halves should be tightened evenly (crosswise!) with a torque wrench. Maximum value here is after 6-8NM. A crooked housing is also often the cause of dripping motors. Usually these are engines that have been welded before. Only a few specialist welding companies take care of correct preheating and cooling of the housing. The biggest mistake is to make a welding process on individual halves. Whenever possible, both halves should be held together with all motor bolts! Another common cause of leaking engines is defective O-rings. Small rubber rings, which usually lie in a groove made for them, seal corresponding components like the shaft sealing rings.
(machine-translated)
 

Fits the following vehicles


  • Eibar Lambretta LI 125 (series 2)
  • Innocenti Lambretta GP 125 (DL 125)
  • Innocenti Lambretta LI 125 (series 1)
  • Innocenti Lambretta LI 125 (series 2)
  • Innocenti Lambretta LI 125 (series 3)
  • Innocenti Lambretta LI 125 Special (LIS 125)
  • Serveta Lambretta Lince 125
  • Serveta Lambretta Scooterlinea 125
  • Serveta Lambretta Special 125
  • SIL Lambretta GP 125
Read, edit and discuss reviews...Continue reading

Ratings


15 Oct 2016

buon prodotto

7 Mar 2016

Kopf- und Fussdichtung passen nicht, müssen von mir noch angepasst werden!

Customers who bought this item also bought


Other customers also viewed the following items


Recently viewed items