Write a review
Evaluations will be activated after verification.
Item successfully added.
Drive shaft -PIAGGIO (NOS), M16- Vespa PK50-125 S/XL/XL2, V50 (V5A1T ab Nr. 69444), V50 Special (V5B3T ab Nr. 94315), V50 Elestart (V5B4T ab Nr. 1514), PV125 (VMA2T ab Nr. 150203), ET3 (VMB1T ab Nr. 8161)
Part no.:
9010020NOS
Description
Original Piaggio main shaft.
The parts have the beginnings of rust due to the long storage, but offer the advantage of an original component with the high Piaggio quality standard at the time.
The main shafts correspond to that of the gearbox type Vespa PK (from the outside recognizable by the nut with M16 thread and safety cage). However, the PK gearbox type was already used in vehicles from 1976 (i.e. before the PK models, e.g. V50/PV125/ET3)*. The gearwheels suitable for this mainshaft type can be recognized by the marking '42', which can be read on the gearwheels.
With the appropriate matching gears, this mainshaft can also be used in the V50, PV125, ET3 engines. If a mainshaft with M14 castle nut was previously installed in your engine, the washer for the brake drum must be adapted (extend the inner diameter) and the nut together with the retaining cage of the PK models must be used. Alternatively, the brake drum including brake anchor plate of the PK models can be used.
*( V50 (V5A1T from No. 69444), V50 Special (V5B3T from No. 94315), V50 Elestart (V5B4T from No. 1514), PV125(VMA2T from No. 150203), ET3 (VMB1T from No. 8161))
€69.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Piaggio | 182541, 111596 |
| Customers alternatively searched for | |
|---|---|
| Hauptwelle | Hinterradwelle | Achswelle | Antriebswelle | Sekundärwelle | Hinterradachse | Achse | Ausgangswelle | Radachse | Antriebsachse | Shaft | Driveshaft | Drive Shaft | Output Shaft | Input Shaft | Layshaft | Primary Shaft | Arbre Secondaire | Albero Secondario | Eje Principal | | |
Related items
Made in Italy
7674336
Gear selector -MADE IN ITALY (High Quality)- 4-arms, 3 Gear wheel - Vespa 50N (V5A1T, 92877-), 50L, 50R, 50 Special (V5A2T, V5B3T), Special Elestart (V5B2T, V5A3T), V90 (V9A1T), V100 (V9B1T), PK50 HP (V5N2T), PK50 N (V5X5T), PK50 Rush (V5X4T), PK100
7674336
The item is ordered and will be in stock soon
€59.95
*
*incl. VAT plus shipping costs
RECOMMENDED
bgm Pro
BGM01803
4th gear cog -BGM PRO, 4-speed gearbox- Vespa PK S, PK XL1, PK XL2, ETS, V50 (V5A1T, 69444-), Special (V5B3T, 94315-), Elestart (V5B4T, 1514-), PV125 (VMA2T, 150203-), ET3 (VMB1T, 8161-) - 48 teeth (short)
BGM01803
The item is ordered and will be in stock soon
€64.00
*
*incl. VAT plus shipping costs
variants
Fa Italia
7672902
Gear selector spring set -VESPA- V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL - standard
7672902
further versions from €4.50
-
Available immediately (delivery time 1-3 working days*)reinforced
-
Available immediately (delivery time 1-3 working days*)standard
KR Automation
3333488
Conversion set PK XL2 -engine to 2-gear change cables -KR AUTOMATION- Vespa V50, PV125, ET3, PK S, PK XL
3333488
The item is ordered and will be in stock soon
€97.98
*
*incl. VAT plus shipping costs
variants
Fa Italia
7672903
Gear selector spring set -VESPA- V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL - reinforced
7672903
further versions from €4.50
-
Available immediately (delivery time 1-3 working days*)reinforced
-
Available immediately (delivery time 1-3 working days*)standard
Alternative items
Benelli
BE11000
Drive shaft -BENELLI Bull- Vespa V50, V90, 50N, PV125, ET3, SS50, SS90, PK S, PK XL1, PK XL2, ETS
BE11000
The item is ordered and will be in stock soon
€239.00
*
*incl. VAT plus shipping costs
Recently viewed items