Write a review
Evaluations will be activated after verification.
Item successfully added.
Brake drum, rear -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA, VBB, VNA, VNB, ACMA, Hoffmann
Part no.:
BGM5310
Description
brake drum rear "Made in Germany" by Strohspeed for BGM PRO.
Fits all Vespa models with 8 inch tyres (not Vespa Super VNC/VBC).
Made of high quality cast iron, it offers enormous advantages compared to conventional brake drums made of thin sheet steel:
- suitable for original and tubeless rims
- no distortion due to hot brakes
- perfect concentricity due to exact centering over the wheel shaft (tol. 0.02mm!)
- no more brake rubbing again
- clearly better heat dissipation through the cooling fins
- substantially more stable due to greater overall wall thickness
- additional reinforcement through cooling fins
- no brake fading under permanent load (max. temperature 200-240°)
With this brake drum even an 8 inch Vespa finally brakes really well!
Note: The brake drums are delivered oiled to protect against corrosion. Please remove the oil before assembly (e.g. with brake cleaner, see accessories). As with all cast iron brake drums, they corrode if they are not protected and get damp. For protection, the outside of the brake drum can be coated with heat-resistant exhaust paint. In this way the drum also remains visually attractive for a long time.
BITTE NOTE: Special brake linings are required for proper function. These are also available from BGM Pro in two versions, for vehicles with one or two brake lining bolts (alternatively we also offer ready-made sets consisting of drum and linings)
The brake shoes are narrower to compensate for the thicker wall thickness of the BGM brake drum. The brake performance remains unaffected, it does not depend on the surface of the linings. The brake shoes are dependent on the direction of travel, please note this during installation (see also installation instructions in the download area).
AI-translation
€99.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| BGM PRO | 5310 |
| Piaggio | 25151 |
| Customers alternatively searched for | |
|---|---|
| Bremstrommel | Vorne | Trommel | Bremse | Front | Brake | Hub | Tambour De Frein Avant | Tamburo Freno Anteriore | Tambor De Freno Delante | | |
Related items
bgm Pro
BGM5310BP
Brake shoes -BGM PRO Ø=127x20 mm for brake drum BGM5310- Vespa 8" rear, 1 anchor pin, Vespa Wideframe V1T-V15T (r), V30T-V33T (r), VM (r), VN (r), VL (r), VB (r), VNA1T-VNA2T (r), VNB1T-VNB3T (r), VBA1T (r), VBB1T (r)
BGM5310BP
The item is ordered and will be in stock soon
€33.90
*
*incl. VAT plus shipping costs
Alternative items
bgm Pro
BGM5310KT
Brake drum, rear 8 inch incl. brake shoes, 1 anchor pin -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA1T, VBB1T, VNB2T, VNB3T, VNA, ACMA, Hoffmann
BGM5310KT
The item is ordered and will be in stock soon
€128.00
*
*incl. VAT plus shipping costs
Recently viewed items