Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Rear wheel axle layshaft -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

BGM6190
Rear wheel axle layshaft -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP
Rear wheel axle layshaft -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP
Rear wheel axle layshaft -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP
Rear wheel axle layshaft -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP
Rear wheel axle layshaft -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

Description


bgm PRO rear main shaft for all Lambrettas of the Li family: S1 + S2 + TV2 + S3 + TV3 + Special + SX + GP + Serveta

Countershaft in best quality perfect for 4 and 5 speed gearboxes.

The main shaft is a central component for safety, it is the connection between the engine and the rear wheel. Original Innocenti mainshafts are more than 50 years old and nobody can be sure what has happened to the mainshaft during this period of time. Especially with improper assembly with too high torque, the mainshaft can shear off at the transition of the thread to the mainshaft. This is a huge danger that can be avoided with a new main shaft of good quality.

For the new rear brake drums with a taper of 8°, the required tightening torque is 147-161 Nm. Tighten to the lower value of 147 Nm with a torque wrench and then check that the locking plate for the rear wheel nut can be fitted. If this is not the case, gradually increase the tightening torque until one of the holes in the brake drum is aligned with the hole in the locking plate. Insert the hexagon socket screw of the locking plate with medium-strength threadlocker and tighten with a tightening torque of 14 - 14.7 Nm. AI-translation

 
€99.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Innocenti 19030002
Customers alternatively searched for
Hauptwelle | Hinterradwelle | Achswelle | Antriebswelle | Sekundärwelle | Hinterradachse | Achse | Ausgangswelle | Radachse | Antriebsachse | Shaft | Layshaft | Arbre Secondaire | Albero Secondario | Eje Principal | Eje trasero | Eje engranaje cambio | Eje secundario cambio | Eje de engranajes |
bgm PRO rear main shaft for all Lambrettas of the Li family: S1 + S2 + TV2 + S3 + TV3 + Special +...Continue reading
Recently viewed items