Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

Item successfully added.

Primary drive -BGM PRO, type Cosa2/FL primary gear BGM Pro 62 tooth (straight)- Vespa PX125, PX150, PX200 (1997-), Cosa2/FL (1992-) - 23/62 tooth (2.69)

€149.00 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
PRIMÄR-KIT BGM PRO EXTRA LANG Motors with a lot of torque and early power peak choose the...Continue reading


Motors with a lot of torque and early power peak choose the straight geared clutches which also require a straight geared primary wheel (also available as set with clutch). This allows very long reduction ratios to be achieved. Also perfectly suitable if the overall gear ratio is too short (e.g. MHR) for very sporty engines with a modified auxiliary shaft including shorter gear steps. Another option if the actual gearbox is very short (PX80) or the gear ratio is too low due to a small wheel diameter (PX200 engine with 8 inch tires in Oldie).

Coupling pinion/ Primary wheel

23 (62/63)

24 (62/63)

25 (62/63)









The smaller the result, the longer the motor ratio, the higher the max. motor ratio can be. The extra long primary reduction ratios based on the 62/63 tooth primary gear are only available with straight teeth and therefore cannot be combined with conventional (helical) drives.
The high torque of the motors which require such a long reduction ratio is transmitted directly into the gear via a straight toothing without exerting lateral forces on the bearing of the auxiliary shaft. Thanks to precise manufacturing, the straight-toothed drives are as quiet as the helical drives.

The primary kit included in the delivery contains all parts required for assembly.
The set also has reinforced BGM Pro fir springs. This protects the entire drive train as the springs do not block even at high torque and no load peaks are transmitted.
The cover plates of the set have a smaller diameter and only fit into the BGM Pro primary wheels with 62/63 teeth.

The scope of delivery includes the coupling pinion with matching primary gear (both straight-toothed) and a special repair kit for riveting the primary gear to an existing auxiliary shaft (fir tree).

BITTE NOTE: The straight-toothed BGM primary pinions and primary gears cannot be combined with Polini or Malossi parts. The module is different for BGM parts for maximum stability.



Fits the following vehicles

  • Vespa (Piaggio) Vespa 180 Rally (VSD1T)
  • Vespa (Piaggio) P 200 E (VSX1T, -1980)
  • Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983)
  • Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
  • Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
  • Vespa (Piaggio) Vespa 200 Rally (VSE1T, Ducati)
  • Vespa (Piaggio) Vespa 200 Rally (VSE1T, Femsa)
Read, edit and discuss reviews...Continue reading

Customers who bought this item also bought

Fuel hose SC- Ø inner = 7mm, Ø outer = 14mm, l = 750mm Fuel hose SC- Ø inner = 7mm, Ø outer = 14mm, l...
Unit 0.75 m (€4.27 * / 1 m)
€3.20 *

Other customers also viewed the following items

Gearbox oil -BGM PRO STREET- Vespa SAE30 API GL 3- 250ml Gearbox oil -BGM PRO STREET- Vespa SAE30 API GL...
Unit 0.25 l (€15.96 * / 1 l)
€3.99 *
Recently viewed items