Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

Item successfully added.

Clutch -BGM PRO Superstrong 6 plate, 10 spring- Lambretta LI, LI S, SX. TV (series 2-3), DL/GP -

€429.00 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store

Number of teeth:

P For this item you get fidelity point/s
The bgm PRO Lambretta Superstrong clutch is CNC machined from billet in Germany. It comes...Continue reading


The bgm PRO Lambretta Superstrong clutch is CNC machined from billet in Germany. It comes equipped with six racing red clutch plates, ten especially for this clutch made springs and five 1.5 mm steel discs. The clutch is a plug & play solution that fits without any spacers or fiddling.
Together with it's massive surface of 6 plates and 10 special made springs it is desgined to withstand a torque rate of 60Nm. More gentle setups can use softer springs which are also available from BGM.
If you're going to use springs from other manufacters please ensure that their not longer than 15mm when fully compressed.

All parts are highly precision machined from 42CrMo4.
    The delivery contains:
  • CNC rear sprocket 46 or 47 teeth
  • extended CNC clutch spider
  • CNC pressure plate with extra length for more room and no clutch drag
  • adaptors to use the pressure plate for dl/GP or Li/SX
  • CNC machined top plate offset for more clearance between top plate and kickstart shaft
  • six racing red bgm PRO clutch plates
  • five 1.5 mm steel plates
  • ten especially made clutch springs for extra smooth operation
  • bgm PRO clutch bush

The clutch pressure plate and spider can be used as single components to upgrade any other aftermarket 5 and 6 plate rear sprockets. As long as these are made to the original Innocenti measurements it is a straight fit. If not made to this spec some modifications might be needed.

TIP: Always have a look at the clearance between crwonwheel and clutch sprocket. Shims to adjust the distance are fitted under the clutch sprocket and are available from 0.8-1.6 mm thickness.


Fits the following vehicles

  • Eibar Lambretta LI 125 (series 2)
  • Eibar Lambretta LI 150 (series 2)
  • Eibar Lambretta TV 175 (series 2)
  • Innocenti Lambretta GP 125 (DL 125)
  • Innocenti Lambretta GP 150 (DL 150)
  • Innocenti Lambretta GP 200 (DL 200)
  • Innocenti Lambretta LI 125 (series 1)
  • Innocenti Lambretta LI 125 (series 2)
  • Innocenti Lambretta LI 125 (series 3)
  • Innocenti Lambretta LI 125 Special (LIS 125)
  • Innocenti Lambretta LI 150 (series 1)
  • Innocenti Lambretta LI 150 (series 2)
  • Innocenti Lambretta LI 150 (series 3)
  • Innocenti Lambretta LI 150 Special (LIS 150)
  • Innocenti Lambretta TV 175 (series 2)
  • Innocenti Lambretta TV 175 (series 3)
  • Innocenti Lambretta TV 200 (GT 200)
  • Innocenti Lambretta SX 150 (X 150 Special)
  • Innocenti Lambretta SX 200 (X 200 Special)
  • Serveta Lambretta Lince 125
  • Serveta Lambretta Scooterlinea 125
  • Serveta Lambretta Special 125
  • Serveta Lambretta Lince 150
  • Serveta Lambretta Scooterlinea 150
  • Serveta Lambretta Special 150
  • Serveta Lambretta Scooterlinea 175
  • Serveta Lambretta Jet 200
  • Serveta Lambretta Lince 200
  • Serveta Lambretta Scooterlinea 200
  • SIL Lambretta GP 125
  • SIL Lambretta GP 150
  • SIL Lambretta GP 200


bgm Tuning Lambretta 225 Racetour cylinder and Superstrong clutch back in stock

By: Scooter Center
2018-06-13 08:43:49

bgm Tuning Lambretta 225 Racetour cylinder and Superstrong clutch back in stock

bgm Tuning Lambretta highlights back in stock Besides our bgm catalogue 2018 we have another piece of news for you. Our two bgm tuning parts for Lambretta are now available again: 225cc RT cylinder a... Continue reading

Casa Lambretta Racing Team successful with BGM PRO parts

By: Scooter Center
2016-07-25 11:16:34

Casa Lambretta Racing Team successful with BGM PRO parts

Casa Lambretta-Racing-Team uses BGM PRO Tuning parts Lambretta Racing We supply a selection of our high-quality BGM PRO Lambretta products to the Casa Lambretta Racing Team of Vittorio Tessera... Continue reading


Read, edit and discuss reviews...Continue reading


14 Oct 2016

Beste Kupplung

Customers who bought this item also bought

Other customers also viewed the following items

Gearbox oil -BGM PRO STREET- Lambretta SAE80, GL3 - 500ml Gearbox oil -BGM PRO STREET- Lambretta SAE80,...
Unit 0.5 l (€15.80 * / 1 l)
€7.90 *
Recently viewed items