Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Clutch -BGM PRO Superstrong 6 plate, 10 spring- Lambretta LI, LI S, SX. TV (series 2-3), DL/GP - 46 tooth

BGM8011NR46
€429.00 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
Clutch (Lambretta)
diameter clutch plates: 120 mm
friction material: red cork
thickness friction discs: 2.55 mm
manufacturing method clutch spider: CNC machined
inner diameter clutch spider: 122 mm
outer diameter clutch spider: 128 mm
number of friction discs: 6
number of steel discs: 5
number of springs: 10
teeth clutch sprocket: 46
P For this item you get fidelity point/s

Available versions

Part no.: Number of teeth Price Stock Cart Save
Part no.: BGM8011NR46 Number of teeth 46 teeth Price
€429.00
Stock
In stock: can be delivered or picked up in the store
Cart Save
Part no.: BGM8011NR47 Number of teeth 47 teeth Price
€429.00
Stock
In stock: can be delivered or picked up in the store
Cart Save
The bgm PRO Lambretta Superstrong clutch is CNC machined from billet in Germany. It comes...Continue reading

Description


The bgm PRO Lambretta Superstrong clutch is CNC machined from billet in Germany. It comes equipped with six racing red clutch plates, ten especially for this clutch made springs and five 1.5 mm steel discs. The clutch is a plug & play solution that fits without any spacers or fiddling.
Together with it's massive surface of 6 plates and 10 special made springs it is desgined to withstand a torque rate of 60Nm. More gentle setups can use softer springs which are also available from BGM.
If you're going to use springs from other manufacters please ensure that their not longer than 15mm when fully compressed.

All parts are highly precision machined from 42CrMo4.
    The delivery contains:
  • CNC rear sprocket 46 or 47 teeth
  • extended CNC clutch spider
  • CNC pressure plate with extra length for more room and no clutch drag
  • adaptors to use the pressure plate for dl/GP or Li/SX
  • CNC machined top plate offset for more clearance between top plate and kickstart shaft
  • six racing red bgm PRO clutch plates
  • five 1.5 mm steel plates
  • ten especially made clutch springs for extra smooth operation
  • bgm PRO clutch bush

The clutch pressure plate and spider can be used as single components to upgrade any other aftermarket 5 and 6 plate rear sprockets. As long as these are made to the original Innocenti measurements it is a straight fit. If not made to this spec some modifications might be needed.

 

Blog


bgm Tuning Lambretta 225 Racetour cylinder and Superstrong clutch back in stock

By: Scooter Center
2018-06-13 08:43:49

bgm Tuning Lambretta 225 Racetour cylinder and Superstrong clutch back in stock

bgm Tuning Lambretta highlights back in stock Besides our bgm catalogue 2018 we have another piece of news for you. Our two bgm tuning parts for Lambretta are now available again: 225cc RT cylinder a... Continue reading

Casa Lambretta Racing Team successful with BGM PRO parts

By: Scooter Center
2016-07-25 11:16:34

Casa Lambretta Racing Team successful with BGM PRO parts

Casa Lambretta-Racing-Team uses BGM PRO Tuning parts Lambretta Racing We supply a selection of our high-quality BGM PRO Lambretta products to the Casa Lambretta Racing Team of Vittorio Tessera... Continue reading

Ratings


14 Oct 2016

Beste Kupplung

Recently viewed items