incl. VAT plus shipping costs
|Gear box (classic scooters)|
|number of teeth small primay sprocket:||23|
|combinable primary sprockets:||64 teeth helical (BGM PRO), 64 teeth helical (Bollag Motos, Stoffi's), 65 teeth helical (BGM PRO, Piaggio), 65 teeth helical (Bollag Motos, Stoffi's)|
|Clutch (Largeframe, Wideframe)|
|teeth clutch sprocket:||23|
|height of clutch sprocket:||9.5 mm|
|number of springs:||10|
|number of friction discs:||4|
|thickness friction discs:||3.2 mm|
|number of steel discs:||3|
|inner diameter:||108 mm|
|inner diameter clutch spider:||108.8 mm|
|outer diameter clutch spider:||118 mm|
|manufacturing method clutch spider:||CNC machined|
|clutch spider reinforced:|
Each clutch is subjected to quality control. Thus we assure you that we provide a working and ready to install clutch. The delivery of the complete clutch includes the ready to mount clutch with bgm PRO Cosa clutch plates, a new woodruff key, a suitable clutch nut and an O-ring for the clutch cover.
The number of teeth of the clutch is important for the length of the total reduction. It can also be varied. Possible combinations:
* Special gear cog made by DRT with 24 teeth for 65 teeth original P200 primary gear.
For models up to 150cc it is necessary to remove the small cast aluminum nose in the engine casing in order to mount the clutch. This can even be bent very simple with a large plier. With some clutch covers the drip nose in the area of the radius has to be removed slightly.
The clutch can be mounted in all large frame Vespas. These are all vehicles whose FIN number starts with minimum three charakters at the beginning (e.g. VNB, VNL, VNX, ZAPM etc., the extra 1T, 2T, 3T is not considered) and which have the carburetor directly installed to the crankcase (not in frame or on the cylinder). Some old vehicles before the PX era with the thin washer (1.5 mm) below the clutch have to be exchanged against the PX models (3.3mm/item number 7671297).
* We’re using bgm PRO XL springs:
bgm PRO XL