Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

7671201
Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)
Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)
Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)
Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

Description


Very high quality special nut, made in germany, for all Vespa engines with the clutch on the crankshaft before 1990 which originally have a so-called crown nut. V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc...

This nut, manufactured in Germany for us, completely replaces the old crown nut and thus enables safe and precise work even with torque wrench. In addition to precise manufacturing, it is also suitable for a tightening torque of over 70Nm due to the use of a steel of hardness 10. Many castle nuts do not even achieve half this value. This means that slippage as well as a defective crankshaft/clutch hub due to a loosened clutch nut is put to rest.

  • Replaces the original clutch crown nut
  • Fits all largeframe with old 6/7 spring clutch type
  • Hardness: 10
  • Possible tightening torque: more than 70Nm
  • Thread: M12x1.50 (with collar)
  • Diameter at collar: 18.6mm
  • Height: 9mm
  • Width across flats: 15

Incl. suitable serrated lock washer

Conclusion: No more slipping off when loosening/tightening the nut as well as a bomb-proof fixed coupling.

TIP:Also suitable as polar wheel nut for Flytech/Vespatronic polar wheel nut for Vespa GS160 / GS4 (VSB1T), SS180 (VSC1T), Rally180 (VSD1T), Rally200 (VSE1T, Femsatronic)


AI-translation

 
€4.90 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
General
EAN: 4251389102823
Customers alternatively searched for
Kupplungsmutter | Ersatz | Kronenmutter | M12 | Hochfest | Kupplungsmutter | Kupplungsbefestigung | KupplungssicherungsMutter | Wandlermutter | Kupplungsicherungsmutter | Befestigungsmutter | Kulumutter | Clutch | Nut | Castle | Castlenut | Crown | Crownnut | Ecrou D'Embrayage | Dado Fissa Frizione | Tuerca Embrague |
Very high quality special nut, made in germany, for all Vespa engines with the clutch on the...Continue reading

Fits the following vehicles


Ratings


18 Oct 2016

Excellent

15 Oct 2016

great service !!!

14 Oct 2016

It could be cheaper.

17 Apr 2016

ras

5 Feb 2016

Wie immer Top

25 Aug 2015

gute Alternative zur Kronenmutter, Fächerscheibe dazu ist aber unnötig, Nord-Lock ist empfehlenswerter!!

17 May 2015

Qualität ok, passte bei mir leider nicht, da die Mutter zu gross war, M10 wäre richtig

11 May 2015

passt und erfüllt den zweck, macht spez.-werkzeug für die kupplungsmutter überflüssig und spart zeit beim ein- und ausbau

18 Feb 2015

damit bleibt die Kupplung wo sie hingehört

12 Jan 2015

Fits!

5 Nov 2014

Gute Idee!!

Alternative items


Recently viewed items