Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Crankshaft -DRT (rotary valve), 53mm stroke, 105mm conrod, RV-web 17.4mm wide- "tenuta larga" (wider rotary web) - Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)

7675254
Crankshaft -DRT (rotary valve), 53mm stroke, 105mm conrod, RV-web 17.4mm wide- "tenuta larga" (wider rotary web) - Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)
Crankshaft -DRT (rotary valve), 53mm stroke, 105mm conrod, RV-web 17.4mm wide- "tenuta larga" (wider rotary web) - Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)
Crankshaft -DRT (rotary valve), 53mm stroke, 105mm conrod, RV-web 17.4mm wide- "tenuta larga" (wider rotary web) - Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)
Crankshaft -DRT (rotary valve), 53mm stroke, 105mm conrod, RV-web 17.4mm wide- "tenuta larga" (wider rotary web) - Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)
Crankshaft -DRT (rotary valve), 53mm stroke, 105mm conrod, RV-web 17.4mm wide- "tenuta larga" (wider rotary web) - Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)

Description


Crankshaft -DRT (rotary valve) - Vespa PK125 XL2, PK125 ETS
IMPORTANT: For this tuning crankshaft the housing must be machined.
It is a shaft with 53mm stroke /105mm connecting rod and a wider cheek
on the intake side. Here the intake timing was extended and by the wider
cheek a higher cross section in the intake is possible. The crankshaft stub is like
original on the ETS shafts 24 mm



(TW090123)

AI-translation

 
This item is currently not available.
€229.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
Bearings
sizes: 15x19x20mm
Gudgeon pins
diameter: 15 mm
Crankshafts
stroke: 53 mm
diameter bearing seat rotor side: 25 mm
diameter bearing seat drive side: 17 mm
diameter oil seal seat rotor side: 24 mm
diameter oil seal seat drive side: 22.7 mm
full circle crankshaft:
rotary valve crankshaft:
crankcase has to be milled:
engine casing has to be modified:
Connecting rods
length connecting rod: 105 mm
diameter small end connecting rod eye: 19 mm
OEM numbers (for comparison purposes only)
DRT 01253A105GT
Please inform me once the product is available again.
Customers alternatively searched for
crankshaft | crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | vanne rotative | válvula rotativa | valvola a disco rotante | rotary valve
Crankshaft -DRT (rotary valve) - Vespa PK125 XL2, PK125 ETS IMPORTANT: For this tuning...Continue reading

Fits the following vehicles


Recently viewed items