Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

Item successfully added.

Cylinder -MALOSSI 185 cc I-Tech (CDI not integrated in throttle body)- Piaggio 125-150 cc 4T (AC) 3V ie (Euro 3) - VESPA LX 3V (EUROPA -> 06/2013), Primavera 3V (EUROPA/US), Sprint 3V

€559.00 * €589.89 * (5.24% off)

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
performance class: racing, sport
Gudgeon pins
diameter: 15 mm
Spark plugs
thread type: M10x1,00
thread spark plug: long
heat rating NGK: CR8EB
displacement: 183 cm³
bore: 63 mm
engine type: 4-stroke
type of cooling: air cooled
material: aluminium
material piston cylinder surface: Ceramic
cylinder head inclusive:
cylinder gasket set inclusive:
stroke: 58.6 mm
number of piston rings: 3
production method piston: cast
Piston rings
piston ring type: common ring
circlip type: G-type
wire size of circlip: 1,0mm
P For this item you get fidelity point/s
Malossi Big Bore cylinder I-TECH 4 STROKE 183cc Malossi makes the new Piaggio 3 -valve fly!...Continue reading


Malossi Big Bore cylinder I-TECH 4 STROKE 183cc

Malossi makes the new Piaggio 3 -valve fly!

Whopping 183cc be achieved through a bore extension from small Ø52mm (original) to big Ø63mm. The engine therefore offers significantly more torque and driving pleasure.

As always with Malossi engine life is very good thanks to material selection and processing as well as in the original. In line with the increased torque of the large cylinder kits, the owner of a 125cc version, the clutch and the transducer of the 150cc version should be used (see accessories).
These are much more stable and designed to be larger and thus improve not only the bandwidth but also the touring capability.

The Force Master module fits the new injection needs accordingly, but can also be set individually (+/- 20%). The speed limit of the built-in rev limiter is set by the module automatically at 1000U / min upwards. The module also has four fixed mappings.

The kit is not suitable for the Vespa 946 models. These have different injection electronics (cylinder only suits).

Suitable for:

  • Vespa Primavera 3V ie 125 4T Euro 3 2014 (M811M)
  • Primavera 3V ie 150 4T Euro 3 2014 (M812M)
  • Sprint 3V ie 125 4T Euro 3 2014

Technical data:

  • Bore: 63mm
  • Stroke: 58,6mm
  • Displacement: 182,6ccm
  • Cylinder: Aluminum cylinder with nickel-silicon form ultra-hard carbide coating (therefore very good heat dissipation, short warm-up phase and very long life)
  • Original cylinder head is maintained
  • Incl. Force Master module
  • Complete, ready to install kit
Recently viewed items