Drive shaft -RMS- Vespa PX (1984-1988), Cosa (VNR1T, VNR2T, VSR1T), T5

Part no.: 235908

Drive shaft -RMS- Vespa PX (1984-1988), Cosa (VNR1T, VNR2T, VSR1T), T5

Preview: Drive shaft -RMS- Vespa PX (1984-1988), Cosa (VNR1T, VNR2T, VSR1T), T5

Description

The RMS main shafts are a good replacement for a defective original shaft.
The shaft offered here is suitable for the engines from year of manufacture 1984 with the so-called Lusso transmission (recognizable by the flat shift cross). Since it has no running surface for an internal oil seal, it can be used until 1988. If an engine with an internal rear shaft seal (42x27x10mm) is converted (to the conventional external type (30x47x6mm), this mainshaft is also suitable for all later model years up to today.

Check the shifting cross for wear and replace it directly at the same time
Order shoulder rings for correct adjustment of the installation clearance separately, as required (clearance between gear wheel and shoulder ring max. 0.4mm)

TIP: Can also be used in PX old models, if at the same time also the corresponding transmission gears as well as the shift detent of the PX Lusso models from 1984 is used. Thus, an older vehicle can also be equipped with the more stable Lusso gearbox.

_{AI-translation}

€105.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Save Rate

OEM numbers (for comparison purposes only)
Piaggio	2359085N, 235908, 223219

Customers alternatively searched for
Getriebe \| Komplettgetriebe \| Hauptwelle \| Hinterradwelle \| Achswelle \| Antriebswelle \| Sekundärwelle \| Hinterradachse \| Achse \| Ausgangswelle \| Radachse \| Antriebsachse \| Shaft \| Getriebe \| Driveshaft \| Set \| With \| Gears \| Driveshaft Set With Gears \| Drive Shaft Including Gear Cogs \| Shaft And Gear Assembly \| Arbre Secondaire Avec Pignons De Vitesse \| Kit Albero Trasmis. Ruota Posteriore Compreso Ingranaggi \| Kit Eje Principal Con Marchas \| Eje trasero \| Eje engranaje cambio \| Eje secundario cambio \| Eje de engranajes \|

Customers alternatively searched for

Description

The RMS main shafts are a good replacement for a defective original shaft. The shaft offered...Continue reading