Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)

3334020
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)

Description


Racing exhaust -EGIG PERFORMANCE- Unisex - Midrace exhaust for inconspicuous but powerful street tuning Vespa Smallframe

The name says it all. The EGIG Unisex is almost universally applicable. As one of the few resonance systems on the market, it fits on all Smallframe models without frame machining. The attention was put with the Unisex quite clearly on a high and early torque. Its maximum power is with the Egig170 cylinder already at 7000 rpm, with smaller displacement about 500U/min later. Its big plus is a constant torque, even at the lowest engine speeds. This results in an easily tunable carburetor. The homogeneous pressure curve of the exhaust also makes the carburetor setting relatively insensitive to weather conditions and altitude.

Exhaust material: Steel, unpainted (painting or galvanic treatment for rust protection recommended.

  • Manifold: Ø32mm

  • Muffler: Ø70x280mm

  • Stud spacing: 54-60mm

  • Displacement class: 125-170ccm

  • Suitable for luggage compartment

  • suitable for V50, PV, Primavera, ET3, PK S, PK XL, PK XL2, PK HP

NOTE: For connecting rod 97mm (std.) and 51 stroke (std.) a 90/90 or 3.00 tire is recommended.

AI-translation

 
€398.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
 
Customers alternatively searched for
Auspuff | Rennauspuff | Sportauspuff | Schalldämpfer | Resonanzkörper | Pott | Endtopf | Abgasanlage | Exhaust | Tuningexhaust | Sportexhaust | Racingexhaust | Tuning | Sport | Racing | Pipe | Expansion Chamber | Silencer | Muffler | Pot D'Échappement | Marmitta | Escape |
Recently viewed items