Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Exhaust manifold stub o-ring type - BGM PRO - Ø=37mm, Vespa PX80, PX125, PX150, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, VNA, VNB, VBA, VBB - weld on type, incl. o-ring

BGM1014
Exhaust manifold stub o-ring type - BGM PRO - Ø=37mm, Vespa PX80, PX125, PX150, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, VNA, VNB, VBA, VBB - weld on type, incl. o-ring
Exhaust manifold stub o-ring type - BGM PRO - Ø=37mm, Vespa PX80, PX125, PX150, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, VNA, VNB, VBA, VBB - weld on type, incl. o-ring
Exhaust manifold stub o-ring type - BGM PRO - Ø=37mm, Vespa PX80, PX125, PX150, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, VNA, VNB, VBA, VBB - weld on type, incl. o-ring

Description


Exhaust flange for welding. Suitable for many common exhaust systems. The O-ring provides a good seal against leaking Öl and fuel Üsse. No more Ölnasen running down the Krümmer. The regular diameter of the PX125 exhaust ports is 37mm. Some manufacturers of tuning cylinders take it here with the tolerance is not too accurate, so we recommend the fit on the respective cylinder used to check before mounting. The included O-ring made of the material FPM is resistant up to 240°C, against Öle and fuels. When processing the exhaust flange, the O-ring should not be fitted, as significantly higher temperatures can occur on the workpiece during welding. If the exhaust is used without clamping on the connecting piece, the exhaust manifold should be attached to the engine with springs. For this purpose, we also offer suitable sets with retaining plates for welding to the manifold and for bolting to the engine under Accessories.

AI-translation

 
€27.91 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Customers alternatively searched for
Auspuffkrümmer | Krümmer | Auspuffflansch | Auspuff Krümmer | U | Bend | Downpipe | Exhaust | Manifold | Pipe | Expansion Chamber | Silencer | Muffler | Coude De Pot D'Échappement | Colletore Di Scarico | Codo De Escape |

Ersatzteile


O-ring -BGM PRO - FPM Ø37x3mm, for exhaust manifold stub bgm1014, Vespa PX125, 150, Sprint, VBB
bgm Pro
BGM1014OR
bgm Pro
O-ring -BGM PRO - FPM Ø37x3mm, for exhaust manifold stub bgm1014, Vespa PX125, 150, Sprint, VBB
Available immediately (delivery time 1-3 working days*)
€3.99 *
*incl. VAT plus shipping costs
Recently viewed items