Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Gear selector rod -BGM PRO- Vespa PX (1984-), T5 125cc, Cosa

BGM6502L
€13.90 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
Gear selector rod of high-precision manufacture for all gearboxes of Largeframe models after...Continue reading

Description


Gear selector rod of high-precision manufacture for all gearboxes of Largeframe models after approximately 1984 - Vespa PX, T5, Cosa, Motovespa TX.

Can only be used with flat gear selector cruciform.
If your engine does not feature a flat cruciform and there is also a shim between the gear selector rod and the cruciform, then it is not possible to use this gear selector rod since you scooter still has the old type gearbox and requires another gear selector rod.

TIP: if the gear selector lever in the gear selector box gets frequently broken, you may need to check the gear selector rod. This usually depends on the deformation of the disc whose rotation blocks the lever and finally causes the lever brake. The deformation of the disc is generally due to an inappropriate mounting of the drive shaft: this shall be inserted in the bearing and not by tapping with a hammer on the disc of the gear selector rod.

PLEASE NOTE: the gear selector rods feature a left thread. To dismount the rod, please turn it clockwise.

 
Recently viewed items