Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Ignition -BGM PRO stator plate HP V2.5 silicone- Vespa P-range (with battery 1982-1984) - 7 wires

BGM8027N
€109.00 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic...Continue reading

Description


Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition.

BGM has reworked the BGM PRO ignition base plate, which has proven itself a thousand times over, and made it even better.
A significantly higher light output than with conventional base plates is complemented by a very high quality of coils and pickup.
In addition, the cabling has been changed to textile-sheathed silicone cables.
Another nice detail is the degree exact division of the adjustment markings. This allows the plate to be adjusted very quickly and easily.


The advantages resulting from this compared to conventional PVC pipes (as for example with original Piaggio base plates) are manifold.

ADVANTAGES OF SILICONE LINES

  • Extremely temperature resistant (-40°C to +250°C))
  • Always remains flexible
  • Very good mechanical protection by the textile fabric
  • Resistant to fats, oils, alcohols, oxygen, ozone
  • Very high insulation properties

The BGM PRO HP ignition base plate is designed as a high-quality 1:1 replacement for an original ignition/alternator.
It can be replaced without modifications. The higher light output does not require any other illuminants.

Of course, the well-known features have also been retained:

  • Proven excitation coil with copper plate for highest reliability
  • Pickup with carbon barrier layer for a clean ignition pulse
  • Cleanly processed HP light coils
  • High quality solder joints
  • Original cable lugs and length for very easy cabling

NOTE: The BGM pickup has a nominal resistance of 100 Ohm (+/- 10Ohm)

AI-translation

 

Alternative items


Ignition -PIAGGIO stator- Vespa PX EFL Elestart (with battery 1984-1997) -7 wire
Piaggio
9021022
Piaggio
Ignition -PIAGGIO stator- Vespa PX EFL Elestart (with battery 1984-1997) -7 wire
In stock: can be delivered or picked up in the store
€179.00 *
*incl. VAT plus shipping costs
Ignition -OEM QUALITY stator- Vespa PX EFL Elestart (with battery 1984-1997) -7 wire
CIF
3331161
CIF
Ignition -OEM QUALITY stator- Vespa PX EFL Elestart (with battery 1984-1997) -7 wire
In stock: can be delivered or picked up in the store
€86.85 *
*incl. VAT plus shipping costs
RECOMMENDED
Ignition -BGM ORIGINAL stator plate V2.5 silicone- Vespa P-range (with battery 1982-1984) - 7 wires
bgm Original
BGM8027
bgm Original
Ignition -BGM ORIGINAL stator plate V2.5 silicone- Vespa P-range (with battery 1982-1984) - 7 wires
In stock: can be delivered or picked up in the store
€84.89 *
*incl. VAT plus shipping costs
Recently viewed items