Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Carburator -KEIHIN PWK 28mm manual choke - CS=34mm - Adjusting screws rhs

KH280000
€219.00 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
KEIHIN PWK 28 carburetor. Supplied with 38 idle jet, 135 main jet, needle JJH, slide 3,5. The...Continue reading

Description


KEIHIN PWK 28 carburetor. Supplied with 38 idle jet, 135 main jet, needle JJH, slide 3,5.
The connection diameter is 34 mm for the inlet side and 49 mm for the air filter.
The KEIHIN carb is a very powerful alternative to Dellorto VHSA and Mikuni TMX carbs. The KEIHIN is perfect made. The bore holes to feed the carb with fuel are much better than on the KOSO.
The KEIHIN are even easier to the setup properly. Their responding is very good. Over the whole rev range the KEIHIN persuades with a high power output and a good over rev potential. Not without cause they are applied in the racing fraternity from Moto-X to street racing.

Some advice to set it up: If you have a Piaggio engine fitted with a MHR Team cylinder kit or a similar kit you just have to change the main jet. That should be in the range of 145 - 150. If you do have a MHR kit or something similar fitted to a Minarelli engine the main jet should be between 150 - 158.

Kyajet - PWK tuning tool (click)

 
Read, edit and discuss reviews...Continue reading

Ratings


13 Feb 2016

Wrong Needle, and jets description

10 Feb 2016

Sehr guter Vergaser, kompakt sodass er mit MRP Membran in eine Sprint passt, jedoch Standgasschraube auf der falschen Seite sowie Leerlaufgemischschraube nicht zugänglich - Vergaser muss dafür ausgebaut werden

Customers who bought this item also bought


Piping for leg shield trim -VESPA- 1600mm Piping for leg shield trim -VESPA- 1600mm
Unit 1.6 m (€3.69 * / 1 m)
from €5.90 *
Bell mouth -BGM - Bell mouth -BGM -
from €7.90 *

Other customers also viewed the following items


Needle -KEIHIN PWK- Needle -KEIHIN PWK-
from €13.44 *
Recently viewed items