Write a review
Evaluations will be activated after verification.
Item successfully added.
Cylinder -MALOSSI 112 cc- Vespa V50, PK50
Part no.:
M318694
Description
With the Malossi 112cm³ cylinder, the displacement can be increased well over 100 percent. And all this without having to change the shaft.
Nevertheless some conditions should be fulfilled:
the connecting rod bearings should be in perfect condition,
the clutch should at least be equipped with a reinforced spring. Alternatively a 4-disc clutch should be installed directly. The carburetor size should be at least 19 mm.
Conclusion: very good cylinder, if you want to realize the maximum displacement without changing the crankshaft.
AI-translation
Nevertheless some conditions should be fulfilled:
the connecting rod bearings should be in perfect condition,
the clutch should at least be equipped with a reinforced spring. Alternatively a 4-disc clutch should be installed directly. The carburetor size should be at least 19 mm.
Conclusion: very good cylinder, if you want to realize the maximum displacement without changing the crankshaft.
AI-translation
€219.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| General | |
|---|---|
| performance class: | sport |
| Gudgeon pins | |
| diameter: | 12 mm |
| Spark plugs | |
| thread type: | M14x1,25 |
| thread spark plug: | short |
| heat rating NGK: | B8HS |
| Cylinders | |
| displacement: | 112 cm³ |
| bore: | 57.5 mm |
| engine type: | 2-stroke |
| type of cooling: | air cooled |
| material: | cast iron |
| material piston cylinder surface: | cast iron |
| cylinder head inclusive: | |
| cylinder gasket set inclusive: | |
| number of transfers (incl.boost ports): | 6 |
| number of boost ports: | 2 |
| shape exhaust port: | single port (oval) |
| exhaust mounting: | flange |
| flange type: | 2 studs |
| exhaust bolt pitch: | 52 mm |
| thread exhaust studs: | M6 |
| Crankshafts | |
| stroke: | 43 mm |
| Pistons | |
| number of piston rings: | 2 |
| production method piston: | cast |
| Piston rings | |
| piston ring type: | common ring |
| thickness rings: | 1,5mm |
| Circlips | |
| circlip type: | G-type |
| wire size of circlip: | 1,0mm |
| Cylinder heads | |
| cylinder head type: | one piece |
| OEM numbers (for comparison purposes only) | |
| Malossi | 318694, M318694 |
| Customers alternatively searched for | |
|---|---|
| 318694 | M318694 | Zylinder | Ersatzzylinder | Rennsatz | Hubraumkit | Hubraumsatz | Kubiksatz | Sportzylinder | Sportkit | Tuningzylinder | Tuningsatz | Tuningkit | Bigbore | Rennzylinder | Rennkit | Kit | Cylinder | Kolbenlaufbahn | Laufbahn | Kühlrippen | Laufbuchse | Zylinderlaufbuchse | Barrel | Jug | Cylindre | Cilindro | | |
Related items
Polini
7675742
Carburator -POLINI- CP 19mm - Vespa PV125, ET3, PK S, PK XL - fits original intake manifold 19/19 -CS=Ø23/30mm
7675742
The item is ordered and will be in stock soon
€167.90
*
*incl. VAT plus shipping costs
OEM-Qualität
9901076KT
Stud set incl. nuts -M7 x 35mm- (used for cylinder Vespa V50, PK50)
9901076KT
The item is ordered and will be in stock soon
€5.90
*
*incl. VAT plus shipping costs
Alternative items
Ersatzteile
Recently viewed items