Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

Item successfully added.

Mounting tool for ball bearing 6204 onto crankshaft, flywheel side, Smallframe -BGM PRO (Made in Germany)- Vespa V50, SS50, SS90, V90, V100, PV125, ET3, PK S, PK XL

€14.90 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
EAN: 4251389104421
P For this item you get fidelity point/s
Special tool - Made in Germany A bearing can be mounted quickly and easily like a...Continue reading


Special tool - Made in Germany

A bearing can be mounted quickly and easily like a professional. This is possible with this quality tool. The bearing is guided cleanly and cannot tilt. The engine housing is protected.

Used to mount the ball bearing type 6204 on the crankshaft of the Vespa Smallframe models. The tool is supported on the inner ring of the bearing and thus enables maximum gentle assembly. We also recommend the use of a crankshaft spline. This is pushed between the crank webs and prevents a bending moment that could affect the press fit of the crank pin.

  • Material: 42CroMo4 (1100Nmm² tensile strength!))
  • surface: blue galvanized

TIP: heat the bearing before mounting (boiling water) and put the crankshaft into a freezer compartment overnight or freeze it with our cold spray (see accessories).

An ideal supplement is our recoilless hammer from Toptul.


Recently viewed items