Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal set engine -LAMBRETTA- LI 125-150 (series 1)

8800010
Oil seal set engine -LAMBRETTA- LI 125-150 (series 1)
Oil seal set engine -LAMBRETTA- LI 125-150 (series 1)

Description


Oil seal kit for the Lambretta Li Series 1.

Oil seals are natural wear parts of every engine. If they are defective, they can no longer perform their very important task of sealing a shaft or axle against an undesirable medium such as air, oil and/or water. This can result in very unpleasant side effects such as false air or oil loss, which can quickly put an engine out of action. Sometimes defective shaft sealing rings also cause creeping defects, which as such remain undetected at first. A slightly increased idle speed does not arouse the curiosity of inexperienced drivers, but at the latest after a jam on the motorway the question arises: why? In order to prevent this extremely philosophical questioning, it is worthwhile to change shaft seals at regular intervals. Regularly in this case refers to an interval of time or kilometers. Thus, from a mileage of 20,000 km, an engine revision should be considered. In principle, the unopened Vespa engines are also famous for much higher mileage, but fate comes along more often than you would like to on the big tour and decides that the shaft seal, which is the most difficult to change, gives up the ghost exactly when you stand in the loneliest prairie...
AI-translation

 
€31.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Oil seal sets
number of oil seals supplied: 4
number of o-rings supplied: 4
size oil seal 1: 25x46x7mm
material oil seal 1: NBR
coating oil seal 1: no
size oil seal 2: 33x50x6mm
material oil seal 2: NBR
coating oil seal 2: no
size oil seal 3: 32x45x6mm
material oil seal 3: NBR
coating oil seal 3: no
size oil seal 4: 22x32x5,5mm
material oil seal 4: NBR
coating oil seal 4: no
size o-ring 1: 12x2,5mm
size o-ring 2: 22x1,8mm
Customers alternatively searched for
Wellendichtringsatz | Simmerringsatz | Dichtringsatz | Wellendichtringe | Simmerring | Dichtring | Dichtung | Simmering | Wedi | Wellendichtung | Oil | Seal | Set | Pochette Joints Spi | Kit Paraoli | Kit Retenes | Bourrage |
Oil seal kit for the Lambretta Li Series 1. Oil seals are natural wear parts of every engine....Continue reading
Recently viewed items